|
| vince |
|
||
|
Before anyone yells that it's not a Ford I am doing this for a friend.
What he wants to know is the torque and the socket size,on the main nut.\ Vince
_________________ Vincennzo |
||
| Top | |
||
| mr_sperm1 |
|
|||
|
it is a Ford, what year are you talking about?
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| xpression |
|
|||
|
id expect somewhere around the 32-36mm in terms of size...
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
i have no idea which model laser you are talking about, but i will base this post on a 90 kf laser.
the size of the nut is 32mm (from memory). as for the correct tension i have no idea, but the way i do it is too tighten the nut finger tight then SLOWLY tighten it with a ring spanner. once the spanner stops without putting barley any force into it THEN give it a QTR of a turn. line the holes up and put a NEW spilt pin through it and your done. easy as
_________________
|
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
if it's the rear KC is 29Nm
KA and KB it says Hub turning torque 0.4 to 1.0 KG messured with a spring scale on one of the wheel studs. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
