|
madmax |
|
|||
|
{USERNAME} wrote: yeah where bouts does the kit actually bolt to....the lower arm or upper?
does anyone have anymore pics of the differnt types - whats best? shim/ratchet/other... If its the shim type you can often tell by the longer bolts sticking through the inner guard into the engine bay.
_________________
|
|||
Top | |
Demo_efman |
|
|||
|
when i got my car lowered - i didnt put a cmaber kit onto the ef! and there is no different tyre wear or anything? is that strange or what do you all think about it?
|
|||
Top | |
msman |
|
||
|
not strange, just some cars need it and some don't, most people fit it when lowering so they don't have to get under it again if its needed.
_________________ why do u write in here. |
||
Top | |
jonnnnno |
|
||
|
Ummmm, do the BAs have a camber kit as standard?
Coz I looked under my ride and noticed a very similar setup. (Destroyer's camber pics). As far as I know my XT is stock (apart from SR kit). Bought it off the manager guy from Ford dealership. |
||
Top | |
destroyer |
|
|||
|
{USERNAME} wrote: Ummmm, do the BAs have a camber kit as standard? It's not that if you have one, its if it has the longer adjustment to allow for the difference in camber when you lower your ride. And the guy at WSP did tell me that all falcon's that are lowered must put them on (total of 4) or you will destroy your inside tyre section!
Coz I looked under my ride and noticed a very similar setup. (Destroyer's camber pics). As far as I know my XT is stock (apart from SR kit). Bought it off the manager guy from Ford dealership.
_________________ Destroy everything and dont look back!!!!!! |
|||
Top | |
XCH45R |
|
|||
|
how much did it end up costing ya dude?
|
|||
Top | |
jonnnnno |
|
||
|
Ah i see...
Well, its a late 2003 build and bought it early 2004 for a bit under $30K (split it with my dad), only had about a thousand k's on it. Came with the SR kit and 17", but it doesnt have the 6 stacker CD or rear power windows or whatever the SR comes with. |
||
Top | |
destroyer |
|
|||
|
{USERNAME} wrote: Ah i see... looks good mate!!!
Well, its a late 2003 build and bought it early 2004 for a bit under $30K (split it with my dad), only had about a thousand k's on it. Came with the SR kit and 17", but it doesnt have the 6 stacker CD or rear power windows or whatever the SR comes with.
_________________ Destroy everything and dont look back!!!!!! |
|||
Top | |
jonnnnno |
|
||
|
Thanks, real mods to come when money comes
|
||
Top | |
xr8ute |
|
||
|
Destroyer, it looks like the only think they changed was the toe? Or am I missing something..?
|
||
Top | |
destroyer |
|
|||
|
{USERNAME} wrote: Destroyer, it looks like the only think they changed was the toe? Or am I missing something..? yeh the toe was adj. mostly but if you look at the first adjustment sheet the camber was left -.54 degree right was -1.20 degree all that changed when the allows went on, so yes the toe was mostly changed but it was mostly to do with the camber!!
_________________ Destroy everything and dont look back!!!!!! |
|||
Top | |
XR6EB |
|
||
|
Advanced Sterring and Mechanical 9831 6613 at Arndell Park [near WSID] have the rachet adjustable kits. Not sure how much they are, but they gave me a really good price on my shocks and king springs, and there the only people i trust to work on my car.
_________________ EB S XR6
|
||
Top | |
gogetta |
|
|||
|
so theres not much difference btw the std upper mount thingy and the adj shim design..
I thought the std mount were shimable? or do the stock ones have no adjustment for camber at all?..
_________________ |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 28 guests |