|
| Steady ED |
|
|||
|
Having recently acquired an XR interior for my Fairmont, I'm struck with the dilemma of what to do with the holes in the door trims that the window winders went in. Rears aren't such a biggy, I'll probably just fashion something that sits in the hole for the 'leccy window switchs to sit in. But what about the fronts? I wish I hadn't already drilled holes in my top dash bit, or I'd mount tweeters in there... Only ideas so far are a) Cleaning up the hole with unused tweeter mounts, and telling people they are ports for my front speakers. b) A badge of some sort? c) Just a grey plastic plug, probably a plastic interior screw thing. Any ideas?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Andrew J |
|
|||
|
Try down at the local engravers. You might be able to get a little badge, and have something engraved into it. Or you could screw the winders to the original position just for laughs. Or stick an XR badge over it, lots of choices!
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| nicco |
|
|||
|
Is there any reason you cant pull the material out of the new door trims and put it into your original ones? So you have the original door trims with no holes, and they match your seats...
|
|||
| Top | |
|||
| joeboo |
|
|||
|
how about a light so when u open the door it lights up
_________________ FOR CUSTOM MADE VINYL GRAPHICS, STICKERS OR DECALS, EMAIL ME AT joeboo@optusnet.com.au
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
I considered that. It would be hilarious, people trying to wind my windows down...
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
Why not remove the door inserts from the XR door trims, remove the inserts from the Fairmont door trims and then put the XR inserts onto the velour Fairmont door trims? That will solve the problem. If you look at the back of the door trims you will see some metal tabs that can be straightened out to remove the inserts.
_________________ ^^^ What He Said
|
||
| Top | |
||
| Steady ED |
|
|||
|
{USERNAME} wrote: Is there any reason you cant pull the material out of the new door trims and put it into your original ones? So you have the original door trims with no holes, and they match your seats...
Yeah. The whole trim is different, not just an insert. Hard to explain. Fairmont is all velour furry s**t, XR is plasticcy vinyl stuff, with a cloth trim around the handle. edit: thought about that a bit more 
That is an option I guess, dunno what it would look like though. It would be three different material colours...
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| nicco |
|
|||
|
ahh i see.
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
http://members.optusnet.com.au/edxrpart ... Driver.JPG
That's the door trims. No pic of 'mont velour ones though... edit: SEAT http://members.optusnet.com.au/edxrpart ... 20Seat.JPG
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
{USERNAME} wrote: http://members.optusnet.com.au/edxrparts/Seats/ED%20XR%20Door%20Trims%20Driver.JPG
That's the door trims. No pic of 'mont velour ones though... edit: SEAT http://members.optusnet.com.au/edxrpart ... 20Seat.JPG i was wrong, those door inserts won't fit on Fairmont door trims. They look a lot smaller and there the wrong shape
_________________ ^^^ What He Said
|
||
| Top | |
||
| JOSE |
|
|||
|
what i did when i put elec windows in my ED was to keep the two rectangles that i cut out of the trim for the ashtray/cig/switch assembly, and cut it into 4 circles that covered up the holes, not the best looking soloution but does the job.
_________________ Because i can. |
|||
| Top | |
|||
| GlennBA |
|
|||
|
my au had a rip in the door trim and dad took it to a plastic welder and they fixed it. You can't even tell where it was. Perhaps they could somehow fill the holes and match the plastic over them?
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
