|
| EL-FAIRMONT-GHIA |
|
||||
|
Hey
I am seeking the stock standard 6 x CD stacker that was shipped with the 1998 EL Fairmont Ghia. My CD stacker was stolen several months ago, all that is left are 2 x bent/buckled mounting brackets and bare wires [as illustrated in the attached photo's]. If I was to purchase the stacker I would require all associated plugs/connectors etc. Thank you for reading!
|
||||
| Top | |
||||
| noisy |
|
||
|
Try ABC spares at Oxley they had one from a ef a while ago
_________________
|
||
| Top | |
||
| EL-FAIRMONT-GHIA |
|
||
|
{USERNAME} wrote: Try ABC spares at Oxley they had one from a ef a while ago
Thanks Mate! I Might Just Do That!
|
||
| Top | |
||
| Neal-50 |
|
|||
|
dude i have a 10 disc from my nf fairlane, is that any use to you.
_________________ Pround memeber Team DYNAMIC WHITE
|
|||
| Top | |
|||
| EL-FAIRMONT-GHIA |
|
||
|
{USERNAME} wrote: dude i have a 10 disc from my nf fairlane, is that any use to you.
I don't think it would be compatible with the wiring and EL Fairmont Ghia Premium Sound HU. If anyone can shed any light on this subject then please do!
Thanks for your help mate, very kind of you! |
||
| Top | |
||
| Neal-50 |
|
|||
|
i think its the same, it had the prem hu orginally. its a genuine ford/Pioneer stacker.
_________________ Pround memeber Team DYNAMIC WHITE
|
|||
| Top | |
|||
| EL-FAIRMONT-GHIA |
|
||
|
{USERNAME} wrote: i think its the same, it had the prem hu orginally. its a genuine ford/Pioneer stacker.
Is there any chance you can post some photos of the wiring/connector at the rear of the unit? |
||
| Top | |
||
| Neal-50 |
|
|||
|
should be able to do that, will be tomora though.
_________________ Pround memeber Team DYNAMIC WHITE
|
|||
| Top | |
|||
| arm79 |
|
|||
|
Beware mate... there are 2 model stackers. If you have a 1998 model Ghia, you might have one or the other. If you have the later model stacker (from Feb 98 build on I think), the previous model stacker wont fit.
So the EF stacker is a no go. The brackets are different sizes and the cable ends are completely different. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: Beware mate... there are 2 model stackers. If you have a 1998 model Ghia, you might have one or the other. If you have the later model stacker (from Feb 98 build on I think), the previous model stacker wont fit.
So the EF stacker is a no go. The brackets are different sizes and the cable ends are completely different. could the later head unit control the early stacker??? i have an EF one with all wiring from the head unit to the stacker. come to think of it i have a complete EF premo setup here head unit, amp, stacker... |
||
| Top | |
||
| arm79 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Beware mate... there are 2 model stackers. If you have a 1998 model Ghia, you might have one or the other. If you have the later model stacker (from Feb 98 build on I think), the previous model stacker wont fit. So the EF stacker is a no go. The brackets are different sizes and the cable ends are completely different. could the later head unit control the early stacker??? i have an EF one with all wiring from the head unit to the stacker. come to think of it i have a complete EF premo setup here head unit, amp, stacker... The head unit part numbers are the same, so I would probably say yes. If you ran the appropriate cable for the stacker and put in the right parcel shelf mounting bracket, then yes, I can see why it wont work. |
|||
| Top | |
|||
| EL-FAIRMONT-GHIA |
|
||
|
Hey :-)
Thank you everyone for your assistance, offers and advice. I have purchased the CD Stacker I required from a FordMods member. Thank you again. Regards Anthony |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
