AU XR6 Series II improvements

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Page 1 of 1 [ 6 posts ]

Post New Topic Post Reply

Previous topic Next topic

EL4.0L

Post subject: AU XR6 Series II improvements

Posted: Mon Dec 26, 2005 12:37 pm

Parts Gopher

Offline

Age: 40

Posts: 89

Joined: 11th Jul 2005

Ride: AU XR6 II

Location: .
NSW, Australia

I am looking to make some engine improvments to my AU XR6 II, I will be doing the obvious ones (extractors & exhaust), but what other mods should i do?

should i do the intake? Port and polish?

Also does anyone have a RWKW figure for a standard AU XR6 II 5 speed manual.

Thanks

_________________

AU XR6 II, 5 SPEED MANUAL, RED, 18" Kaotics RIms

soon to come: extractors, exhaust, 19"rims and superlows.

Top

Profile

Disco Frank

Posted: Mon Dec 26, 2005 1:19 pm

Fordmods Junkie

Offline

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

yer good start so far

hi flow air filter ie K+n is good as well

there is a edit availible for them as well

_________________

RIP SCOTT

Top

Profile

EL4.0L

Post subject: AU XR6 Series II improvements

Posted: Mon Dec 26, 2005 3:04 pm

Parts Gopher

Offline

Age: 40

Posts: 89

Joined: 11th Jul 2005

Ride: AU XR6 II

Location: .
NSW, Australia

So far i have come up with the following shopping list:

pace maker 4480 Extractors
redback 2.5" Exhaust
redback Cat
ss inductions intake
K&N panel filter
Spiral ignition leads
Platinum spark plugs

Should i put a stage 3 cam in as well? but then i would have to chip the ECU.

Also what about a 3" mandrel bent intake and ss inductions throttle body?

thoughts ideas?

_________________

AU XR6 II, 5 SPEED MANUAL, RED, 18" Kaotics RIms

soon to come: extractors, exhaust, 19"rims and superlows.

Top

Profile

Disco Frank

Posted: Mon Dec 26, 2005 4:41 pm

Fordmods Junkie

Offline

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

leave the throttle body alone not needed

get teh altered stage 2 cam and will run on the ecu

the intake is a good idea as well

_________________

RIP SCOTT

Top

Profile

EL4.0L

Post subject: AU XR6 Series II improvements

Posted: Mon Dec 26, 2005 5:07 pm

Parts Gopher

Offline

Age: 40

Posts: 89

Joined: 11th Jul 2005

Ride: AU XR6 II

Location: .
NSW, Australia

What sort of cam shoul i go for? i was thinking of a JMM stage 2 cam or maybe a wade?

_________________

AU XR6 II, 5 SPEED MANUAL, RED, 18" Kaotics RIms

soon to come: extractors, exhaust, 19"rims and superlows.

Top

Profile

Slick

Post subject: Re: AU XR6 Series II improvements

Posted: Mon Dec 26, 2005 6:15 pm

Getting Side Ways

Offline

Age: 55

Posts: 7031

Joined: 18th Apr 2005

Location: Hobart
TAS, Australia

EL4.0L wrote:

What sort of cam shoul i go for? i was thinking of a JMM stage 2 cam or maybe a wade?

check reply above yours.
or go for the surecam street warrior cam & chip package for $995 but performance valve springs is required $295
don't know what type of power is expected from it.

don't worry about wade! they still have issues with idle, I think they've pulled the plug on it all together.

Ask someone in the forum who's.... I'll ask
who's running a altered stage 2 cam for a AU's, what type of power/torque ??% expected?

_________________

Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!!

Pakrat wrote:

You can buy them seppertly

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 6 posts ]

Jump to:

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online
Users browsing this forum: No registered users and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Mon Nov 25, 2024 2:46 am

All times are UTC + 11 hours