|
| kiwiman |
|
||
|
Hi all, I am in the middle of pulling my motor out and was wondering if i have to take the head off first so i can unbolt around the trans or is there another way around it? thanks heaps
_________________ Go hard or go home! Fords Rule! |
||
| Top | |
||
| MacGyver |
|
|||
|
Nope, it is possible to access all the bolts, but it is a pain. You just need to be creating with how to get your hands to the bolts. Move the hoses and unclip some of the wiring to give better access.
cheers Scott
_________________ If it doesn't fit, jam it. If that doesn't work use a hammer. - Engineers Motto |
|||
| Top | |
|||
| kiwiman |
|
||
|
MacGyver wrote: Nope, it is possible to access all the bolts, but it is a pain. You just need to be creating with how to get your hands to the bolts. Move the hoses and unclip some of the wiring to give better access. gee there is not much room there aye; never mind i will keep trying. many thanks
cheers Scott
_________________ Go hard or go home! Fords Rule! |
||
| Top | |
||
| bowsaw |
|
|||
|
Or undo the gearbox from the crossmember, and pull the whole assembly out, thats what i used to do, was easier.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 98 guests |
