|
twirqurky |
|
||
|
wOULD TINNERS REMOVE OR DAMAGE HTE PAINT?
|
||
Top | |
twirqurky |
|
||
|
{USERNAME} wrote: Two screws around each end of the wheel arch, 3 in the holes drilled in the underside, two in each door piece to line up with the metal tags and a small run of Sikaflex along the top lip of the door pieces. You can buy a tube of Sikaflex 227 for about $12 from any decent auto paint supplier.
Cheers, Bob Does that mean that you screw through the door to get to the metal tags on the spats? |
||
Top | |
Bob Hall |
|
||
|
Thinners won't harm cured paint. Yes, you screw through the bottom of the door skin and into the tags.
Cheers, Bob
_________________ Commercial Sponsor
|
||
Top | |
twirqurky |
|
||
|
Ahhh hence why there are so many screws...its slowly making sense. Should be finsihed off tongiht.
|
||
Top | |
smoke_ |
|
|||
|
post some pics when it's done mate, should look good.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
Top | |
twirqurky |
|
||
|
Yeah well 9hrs still not completed, should be finished off tomoorow.
Made a mess with the sikaflex (oops!) so forgive that when you see hte photos. |
||
Top | |
twirqurky |
|
||
|
OK here is the mess wiht the Sikaflex..
How do I get all the black s**t off the car? First time with Sikaflex, put a bit too much on, now I got black fingerprints and outlines on the door spat. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 18 guests |