|
Bluexr6 |
|
||
|
Today I took the number one and two injectors off my car to have a look. On the bottom there was a build up of dirt, not on the nozzle itself but around the bottom area under the area of the o-ring. Does this mean that the injectors are dirty and need cleaning or is this normal to have some dirt in this area.
I pulled them off becuase the car is using to much fuel at the moment and it has a rough idle. |
||
Top | |
scar76 |
|
||
Age: 48 Posts: 259 Joined: 7th Sep 2005 Ride: BA mk11 XR6T UTE ,v8 fairmont gh Location: perth |
mate i reccommend having your injectors cleaned, I had mine done and the throttle response has increased dramatically, it go rid of that lag when you floor it, I have the same rough idle, so the mechanic suggested the clean, still got the rough idle after clean, so I didnt have to pay for it, But it sure does make a difference when Im playing hard.
|
||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
see a mechanic about having a carbon clean done.
that will clean the injectors and also clean all the carbon build up from the valves, pistons, chambers and ports |
||
Top | |
Grechie |
|
||
|
cost me 120 to clean my injectors and get new o rings and the dude even re sprayed the injectors lol!
_________________ Ford Falcon EA Naturally Aspirated 4.0L i6 |
||
Top | |
mini_matt |
|
||
|
get them flow and spray pattern tested , ultrasonically cleaned new filter baskets, orings and spintle cap, then re tested get all the crap from inside of them
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 28 guests |