|
eagleaus |
|
||
|
A question for those in the know.Is the mesh filter located under the solenoid or in the converter itself.As I would like to check and clean it out as I had to clean out the idle circuit again for the black muk.
|
||
Top | |
twase |
|
|||
|
eagleaus wrote: A question for those in the know.Is the mesh filter located under the solenoid or in the converter itself.As I would like to check and clean it out as I had to clean out the idle circuit again for the black muk. It is in the lock off solenoid where the gas enters convertor. Undo the 4 screws and it is a small disk, can be cleaned with petrol and reverse blown with air.
Cheers TW
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
smally351 |
|
||
|
dont forget to turn the tank off and run the line dry before you remove it
_________________ Real Cars have Chrome Bars |
||
Top | |
eagleaus |
|
||
|
Ok, thanks i might remove the lock off solenoid itself and work on it.I will only have to remove the inlet and outlet pipes etc.,
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 33 guests |