|
| Samsy |
|
|||
|
G'Day fellas, My wife went out to start her I6 EF wagon this arvo , and when she did the belt slipped off. When I had a look, the bottom pulley had slipped forward causing the belt to come off. I pushed it back, but when I tried to tighten it , the whole thing moved and I couldnt tighten it. Anyway is it just a matter of re-tightening it or is the H/Balancer stuffed and needs replacing?
Cheers.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
yes it is stuffed '' replace it'
|
||
| Top | |
||
| mreb |
|
|||
|
lucky it wasnt driving when it slipped off they make a mess when it goes through the radiator or bonnet.
|
|||
| Top | |
|||
| Samsy |
|
|||
|
Thanks guys , I thought so. Was just "hoping" it wasnt. So i guess thy're about $100 - $150 for a new one. Are they hard to do? I know I'll need a puller.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| twr7cx |
|
|||
|
remove the belt (in your case done), undo the bolt on the balance, pull off with the puller, and refit.
|
|||
| Top | |
|||
| Samsy |
|
|||
|
How do i stop the whole thing moving. When I got a socket on it before , the whole thing turned.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| Waggin |
|
|||
|
rest a largebreaker bar somewhere in the car and crank?
No, actually.. a rattle gun is a good way to go!
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Waggin wrote: rest a largebreaker bar somewhere in the car and crank?
This works very well - just be careful....
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| Leroy |
|
||
|
yeah you dont want anyone standing too close to it. and just short "bursts" of ignition to get the bolt cracked and it shoudl be right
_________________ Now driving a Hilux |
||
| Top | |
||
| madmax |
|
|||
|
Waggin wrote: rest a largebreaker bar somewhere in the car and crank?
Do it this way it works well. You will struggle to get most rattle guns in there. You may also find it easier to remove the radiator.
_________________
|
|||
| Top | |
|||
| tjb45 |
|
|||
|
Samsy if you need another balancer, I've got one off an AU, tis the same as the EF ones.
|
|||
| Top | |
|||
| Samsy |
|
|||
|
Thanks for the advice fellas, Ill give it a go. Cheers
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| Samsy |
|
|||
|
tjb45 wrote: Samsy if you need another balancer, I've got one off an AU, tis the same as the EF ones.
Thanks tjb, but Ive got one here. Cheers
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 88 guests |
