|
| dazzat |
|
||
|
Hey guys I just got a high series BEM with part of the Loom plugs (cut off with 20cm of wiring not whole loom) The problem is that how hard is it to splice or cut the new loom plugs into the low/mid loom wiring, reason being is that I have a high series cluster.
I am still waiting on a proper pic diagram on where to put the resistor on the high series since there is no line like the low and mid clusters so I am trying to kill 2 birds with 1 stone. Any help would be greatly appeiciated 
_________________ Love getting ripped off by fellow Ford Modders... 4 to date so far since 2005!!!!
|
||
| Top | |
||
| Happy |
|
|||
|
why not put in a high series dash loom and make it all plug and play ?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| dazzat |
|
||
|
Wasnt available, and on stricked budget from missus LOL, thats why i asked the question with what i have
_________________ Love getting ripped off by fellow Ford Modders... 4 to date so far since 2005!!!!
|
||
| Top | |
||
| fordzatmyplace |
|
||
|
Happy wrote: why not put in a high series dash loom and make it all plug and play ?
mabey he dosen't want to go to the trouble of fitting climate control
_________________ ^^^ What He Said
|
||
| Top | |
||
| dazzat |
|
||
|
Very true fordzatmyplace
I dont want to do the climate control, I just want my cluster to work properly, maybe in the future I will do the CC.... 
_________________ Love getting ripped off by fellow Ford Modders... 4 to date so far since 2005!!!!
|
||
| Top | |
||
| fordzatmyplace |
|
||
|
dazzat wrote: Very true fordzatmyplace
I dont want to do the climate control, I just want my cluster to work properly, maybe in the future I will do the CC.... thought that might have been the case  . When you do the CC upgrade, thats when you get the fairmont dash loom . But you probably worked that out for yourself 
_________________ ^^^ What He Said
|
||
| Top | |
||
| twase |
|
|||
|
dazzat wrote: Hey guys I just got a high series BEM with part of the Loom plugs (cut off with 20cm of wiring not whole loom) The problem is that how hard is it to splice or cut the new loom plugs into the low/mid loom wiring, reason being is that I have a high series cluster. If you are putting in the high series BEM then you don't need the resistor.
I am still waiting on a proper pic diagram on where to put the resistor on the high series since there is no line like the low and mid clusters so I am trying to kill 2 birds with 1 stone. Any help would be greatly appeiciated
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| dazzat |
|
||||
|
Your right Twason but as stated I'm waiting on someone to show picture diagram with arrows on where to put it exactly, Its been a while so that is why I got the BEM incase no one actually does it.
I wanted a picture explenation, instead of being told how to do it so here is a high quality Picture that can be easly zoomed in on, if anyone has a program to manipulate the photo on where to put the resistor eg: like Xyphoid has done. It will help and greatly appreiciated
_________________ Love getting ripped off by fellow Ford Modders... 4 to date so far since 2005!!!!
|
||||
| Top | |
||||
| data_mine |
|
|||
|
Mid Series See R63 there - right down the bottom, between the black plug (J2), and the 4 solder pads (JP44). 
Low Series R63 has a resistor on low series (GLi, Futura, XR). edit: f**k. didn't read properly, you're after high series. Um, I'll need a higher res pic than the one you pasted.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Krytox |
|
|||
|
Umm, thats a fairlane dash
no wonder u cant find it I have a few mid series XR/Ghia dash's edit/ oops, i think a few people got mid and high a*** about... well... i did In order to install that dash, you'll need more than just a dash loom... you might have to run door sensors and fuel ones aswell (i think theres a new topic on the front page of this site for the DL dash's)
_________________ Carefree, we may not be number one, but we're up there. Last edited by Krytox on Sat Jan 28, 2006 8:38 pm, edited 1 time in total. |
|||
| Top | |
|||
| dazzat |
|
||
|
ata_mine if you click on the the picture it opens up on a new page then you can right click and save as to your HDD to manipulate, if not pm me your email and i will send more closer pics
Thanks heaps
_________________ Love getting ripped off by fellow Ford Modders... 4 to date so far since 2005!!!!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 82 guests |
