Fordmods Logo

el trip computer installation question 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: el trip computer installation question
Posted: Fri Jan 27, 2006 8:52 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 3

Joined: 17th Jan 2006

Ride: el and xf fairmont ghia

Location: brisbane
QLD, Australia

hi brought a trip computer to fit in my el gli. was just wondering about the trip computer plug. the question is where the other wires are already connected there is little metal contacts inside the pins but where the slots where the other 3 wires have to be run from it doesnt seem to have the metal contacts. does that matter or is it just abit fiddly to get working thanks.
Top
 Profile  
 
 
Posted: Sat Jan 28, 2006 12:16 am 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1339

Joined: 7th Nov 2004

Gallery: 3 images

Ride: FGX G6ET

Location: Worrigee
NSW, Australia

SInce you're new, I guess the benefit of the doubt applies....use the serach and you'll find a billion threads on this...
Have a read here

http://www.fordmods.com/phpBB2/documents.php?doc=32

Thats the "technical document" on it...
Top
 Profile  
 
 
Posted: Sat Jan 28, 2006 3:46 pm 
Getting Side Ways
Offline

Posts: 6911

Joined: 6th Nov 2004

Gallery: 4 images

Ride: BF XR6, BF XT Wagon

Power: 197 rwkw

Location: Perth
WA, Australia

the_scotsman wrote:
SInce you're new, I guess the benefit of the doubt applies....use the serach and you'll find a billion threads on this...
Have a read here

http://www.fordmods.com/phpBB2/documents.php?doc=32

Thats the "technical document" on it...


Doesnt say in that document about what he's asking.

 

_________________

EL XR8
Timmeh banned himself from being a moderator.

Top
 Profile  
 
 
Posted: Sat Jan 28, 2006 4:13 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1339

Joined: 7th Nov 2004

Gallery: 3 images

Ride: FGX G6ET

Location: Worrigee
NSW, Australia

Well, it does really....there are no metal contacts on the connector as the wires are not there. The doco explains what extra wires are required, and so obviously either pins will be needed, or some other sort of connection between the pins and new wires...
Top
 Profile  
 
 
Posted: Sat Jan 28, 2006 4:17 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1339

Joined: 7th Nov 2004

Gallery: 3 images

Ride: FGX G6ET

Location: Worrigee
NSW, Australia

So to answer the question, there are no contacts in those 3 holes as there are no wires there on your loom. You will need to either source some pins, or come up with a way of connecting the 3 new wires to the pins...
Top
 Profile  
 
 
Posted: Sat Jan 28, 2006 8:48 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 3

Joined: 17th Jan 2006

Ride: el and xf fairmont ghia

Location: brisbane
QLD, Australia

yeh i had a look around pins to fit that are gunna be hard to find so i was thinkin of goin to the wreckers an cuttin the plug out of a wreck fairmont. seems like the easy option i rekon 8-)
Top
 Profile  
 
 
Posted: Sat Jan 28, 2006 9:07 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

If Fairmonts are a bit scarce at the wreckers, you can use another EF/EL clock plug or instrument cluster plug for your pins - they are held in by 'fingers', but carefully dissecting your donor plug may be easier to get them out.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Sun Jan 29, 2006 8:07 am 
Fordmods Newbie
Offline

Age: 41

Posts: 3

Joined: 17th Jan 2006

Ride: el and xf fairmont ghia

Location: brisbane
QLD, Australia

ya good diea will give one of em go thanks for ya help :lol:
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 69 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Nov 18, 2024 4:31 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names