|
| EDXR8 |
|
|||
|
Actually the ones I was looking at (http://www.norcom.net.au/~bpt/fuel_system_products.htm) seem to be the plugs with flyleads only, so you still have to cut off the old plugs and solder these ones up. I have seen the adaptors in the US though but IMO its just easier to look for some EV1 injectors instead of trying to adapt EV6's to the E-series loom.
|
|||
| Top | |
|||
| EDXR8 |
|
|||
|
{USERNAME} wrote: I just bought a S/H set of 24# Ford Motorsport injectors. The part number is 0 280 150 947. These show what the EV1 style looks like for our E-series V8's. If I understand correctly, these injectors can be used with our stock fuel pressure.
Yep those will fit straight into E-series V8's, and yes are designed to run the standard ford fuel pressure of 38psi. |
|||
| Top | |
|||
| mickoxhxr8 |
|
||
|
yeh seems to be the better option, hunt begins!!
Thanx |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Vic, i have a Pro-M 75mm Bullit for sale, will be down for the all ford day and will have it with me. PM me if you are interested.
The 5.0 is at Crescent now for an 8860 install, bye bye MAF as i am going top Map sensing and Coil Pack This is all in preperation for the big motor Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Vic |
|
|||
|
{USERNAME} wrote: Vic, i have a Pro-M 75mm Bullit for sale, will be down for the all ford day and will have it with me. PM me if you are interested.
The 5.0 is at Crescent now for an 8860 install, bye bye MAF as i am going top Map sensing and Coil Pack This is all in preperation for the big motor Brett PM sent.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 49 guests |
