|
| cougar30 |
|
|||
Age: 58 Posts: 202 Joined: 9th Nov 2004 Ride: EL Fairmont + EF gli Location: Redcliffe, Brisbane |
{USERNAME} wrote: to change the park light there is a screw when you open the bonnet in the top corner - under the black protective strip. once thats undone, just pull the bastard out! easy as!
cougar: as you have an EL Fairmont, you'll also need a new bonnet as well - you'll need either the EF/EL XR bonnet (with scoops) or just the stock EF Gli/Futura bonnet - as the fairmont ones don't fit with the XR front end. Thanks Uglybob |
|||
| Top | |
|||
| azza |
|
|||
|
If u have a EF XR front and wish to change to EL XR front... u need the reinforcement bar that bolts the bumper to the car from a eL... u cant just pick up a EL XR bar without the bar behind it... the EF ones dont fit... as me and fraser found out when doin his EL XR conversion
_________________ BA XR8 manual ute black |
|||
| Top | |
|||
| Rapier |
|
||
|
{USERNAME} wrote: If u have a EF XR front and wish to change to EL XR front... u need the reinforcement bar that bolts the bumper to the car from a eL... u cant just pick up a EL XR bar without the bar behind it... the EF ones dont fit... as me and fraser found out when doin his EL XR conversion
yeah can get one of any el tho, not an xr specific part is it? |
||
| Top | |
||
| MRE-50L |
|
|||
|
the EF EL XR reo's are the same
u cant use the reo of a std bar cause the reo in the XR bar has been modded/ground away to suit the twin lights
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| Rapier |
|
||
|
ah i c
the reo was on mine when i got it so i dint take much notice |
||
| Top | |
||
| barjesnad |
|
||
|
I was lucky.
I ended up with a EF II XR6. Thats a EF XR6 with a EL front on it. Didnt realize it at the time |
||
| Top | |
||
| Rapier |
|
||
|
only the very late ones got an el front bar, not all ef2's got that one.
|
||
| Top | |
||
| barjesnad |
|
||
|
Ok thanks.
Never realised that. Mine is January 1996 |
||
| Top | |
||
| xr8 dismantler |
|
|||
|
EF and EL front bar reo,s are all the same falcon,XR,fairmont fairlane ect.
the difference with the xr one is 2 supports to hold the top of the bar in the center. the irons are different but interchange as they bolt into different holes in the front of the rails. ef ones are N.L.A from ford and replaced with EL ones. |
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
{USERNAME} wrote: Ok thanks.
Never realised that. Mine is January 1996 you sure it hasnt been changed. i have never seen a EF with a EL front bar fitted from factory. what bonnet vents does it have?? i would think this car has been hit in the front B4 and repaired with later model parts |
|||
| Top | |
|||
| barjesnad |
|
||
|
Its got the Ef Vents.
Not sure about a prang. Also quite possible, if so Im lucky because I got the better front. |
||
| Top | |
||
| Rapier |
|
||
|
i have seen some ef for sale and stuff that look pretty stock but have an EL front bar, possibly they were in a crash or it is possible that some of the late ones came out with the EL xr bar. ford have done this kind of thing abit in the past so it wouldn suprise me if his was the case at all
|
||
| Top | |
||
| barjesnad |
|
||
|
Thats good because I like it when they use the better bits.
You feel like you get extra value for your money. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 53 guests |
