Fordmods Logo

can this be done 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: can this be done
Posted: Mon Dec 13, 2004 7:10 pm 
Parts Gopher
Offline

Age: 40

Posts: 82

Joined: 10th Nov 2004

Ride: xr8

Location: camden
NSW, Australia

hi guys i have a mate who want to no can you fit a ba xr6 turbo motor into a ef xr6 i told him i didnt no but would find out so does anyone think it could be done or has anyone done this at all
Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 7:15 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

anythings prossiable with the right amount of money and modifications. but it wouldn't be a straight remove from the ba and fit it to the ef.
Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 7:16 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3772

Joined: 5th Nov 2004

Gallery: 33 images

Ride: EL Fairmont Ghia

Location: Hobart
TAS, Australia

its been sone but its not a straight bolt up
Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 7:18 pm 
Parts Gopher
Offline

Age: 40

Posts: 82

Joined: 10th Nov 2004

Ride: xr8

Location: camden
NSW, Australia

what mods need to be done
Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 7:18 pm 
Parts Gopher
Offline

Age: 40

Posts: 82

Joined: 10th Nov 2004

Ride: xr8

Location: camden
NSW, Australia

what mods need to be done
Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 7:30 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

gavxr8 wrote:
what mods need to be done


well, for a start, they have different shaped exhaust ports or what ever there called, so a new exhaust manifold will be needed. the ef will probably need some ecu work to have it run the turbo set up. might need to modify the intake piping to fit the different shaped car. i dunno nothing about turbos, but that's a few things i can think of
Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 10:11 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 3277

Joined: 5th Nov 2004

Gallery: 36 images

Ride: Ronald Mcdonald Mobile

Location: Sydney
NSW, Australia

ive herd that u have to lower the engine mounts as the DOHC head site higher than the single cam heads

 

_________________

Gooooone - Eb2 Coon - 143RWKW
Now - Mazda MX5 with HKS Supercharger 190RWKW
Crescent Motorsport Liverpool - 9600 6229

Top
 Profile  
 
 
Posted: Mon Dec 13, 2004 10:31 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

Jetspeed did it in their XR6.

Install looked good, but had to cut a square hole in the bonnet right where the VCT's sit so the bonnet could be closed.

So it partly possible.... If it just fits in a EL XR6, if take a stab and say it might fit in something with a high series bonnet (Fairmont and up) as they are a little higer in that place.
Top
 Profile  
 
 
Posted: Tue Dec 14, 2004 12:41 pm 
Stock as a Rock
Offline
User avatar

Age: 39

Posts: 131

Joined: 5th Nov 2004

Gallery: 5 images

Ride: AU Forté Pursuit, EB Fairmon

Location: Melbourne
VIC, Australia

that question is starting to sound more and more impractical each time i hear it. I reckon by the time u have dumped in the xr6 turbo motor and got EVERYTHING running efficiently ur lookin at spendin around 10-15 gran unless ur sum dude who gets engines/parts super cheap.
If he was to spend 10-15 thousand on the engine he already has in his car, i think i could safely say he'd be pulling 11-12 seconds down the quarter if not quikker.
Thats my say anyway 8-)
Top
 Profile  
 
 
Posted: Tue Dec 14, 2004 12:48 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 4304

Joined: 5th Nov 2004

Gallery: 9 images

Ride: EF Falcon XT-T

Location: Mornington Peninsula
VIC, Australia

i beleive JetXR was alreayd running 12's or something with the old motor.
But the BA engine is so much more impressive :)

 

_________________

FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
DTHWGN - EA GL Wagon, LTD Interior, Satin Black, 5.0, Turbo
RACER - EF Futura , 5.0, 5 Speed
PROJECT - 83 Thunderbird, Lowered, 18" Billet Wheels
DAILY - BA Fairmont Ghia 5.4 3V

Top
 Profile  
 
 
Posted: Tue Dec 14, 2004 7:08 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 607

Joined: 11th Nov 2004

Gallery: 8 images

Ride: XR6

Location: Melbourne
VIC, Australia

there was one at the car show i have a pic but i cant post it
dont know how

 

_________________

BA XR8 BOSS 260
Winter White
18' gt-p wheels
Flash Tuned
2 jl 13.5' w3's
tv indash

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 71 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 6:11 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names