|
OBS35N |
|
|||
|
whats involved in changing the coil pack in my ef?
is it a hard job and will i have to pull off my bbm?
_________________ OBS35N is gooonnnneeee.
|
|||
Top | |
msman |
|
||
|
get to it from under neath, only way to do it.
to remove disconnect ground on battery rasie car disconnect wiring connector on coil remove ignition wires remove the srews, four of them. and its off reverse for install
_________________ why do u write in here. |
||
Top | |
Disco Frank |
|
|||
|
pain in the a** if u ask me and they are bolts not screws!
if u have a 3/8th drive socket set with about 1ft + of extension bars and a uni joint it will easy as u can undo the bolts from above the intake mani
_________________ RIP SCOTT |
|||
Top | |
EBGizmo |
|
|||
|
What about doing the coil pack mod? (3 normal coils) How much is a coil pack compared to 3 ford spec coils?
You'll probably save later on if it happens again. Thats the way i'll be going if (when!) mine fails
_________________ EF II Sedan
|
|||
Top | |
Disco Frank |
|
|||
|
EBGizmo wrote: What about doing the coil pack mod? (3 normal coils) How much is a coil pack compared to 3 ford spec coils?
You'll probably save later on if it happens again. Thats the way i'll be going if (when!) mine fails what mod u mean?
_________________ RIP SCOTT |
|||
Top | |
EBGizmo |
|
|||
|
I've read and seen pics of some EF owners who have replaced the single couil pack with 3 (or is it 6?) individual coil packs, and mounted them near the shockie tower. I thought the mod was on here somewhere, but I couldn't find it. I also wanted to know if it was 3 or 6 coils required, as if its only 3, you'd need to insulate the base of the coils, and connect the extra male plug to that base, or the wasted spark principle wouldn't work. Might even be painfull
Still searching for the mod.
_________________ EF II Sedan
|
|||
Top | |
smoke_ |
|
|||
|
all ef's have coil pack.
ea-ed and also el have just a coil.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
Top | |
msman |
|
||
|
Disco Frank wrote: pain in the a** if u ask me and they are bolts not screws!
if u have a 3/8th drive socket set with about 1ft + of extension bars and a uni joint it will easy as u can undo the bolts from above the intake mani repair manual says screws, i thought they were bolts. done one on an au was pretty easy, did have access to a hoist though.
_________________ why do u write in here. |
||
Top | |
bowsaw |
|
|||
|
I replaced mine, are 10mm bolts, i replaced mine with AU coil pack, both Bosch, but AU one is evidently better, and wasnt much difference in price.
|
|||
Top | |
smoke_ |
|
|||
|
bowsaw wrote: I replaced mine, are 10mm bolts, i replaced mine with AU coil pack, both Bosch, but AU one is evidently better, and wasnt much difference in price.
was it a direct swap? i was told that ef didn't fit au and vice versa.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
Top | |
OBS35N |
|
|||
|
how much am i looking at to buy one and how much labour if i had to get it done at a shop
_________________ OBS35N is gooonnnneeee.
|
|||
Top | |
bowsaw |
|
|||
|
Straight swap,
|
|||
Top | |
OBS35N |
|
|||
|
yeah
_________________ OBS35N is gooonnnneeee.
|
|||
Top | |
Disco Frank |
|
|||
|
EBGizmo wrote: I've read and seen pics of some EF owners who have replaced the single couil pack with 3 (or is it 6?) individual coil packs, and mounted them near the shockie tower. I thought the mod was on here somewhere, but I couldn't find it. I also wanted to know if it was 3 or 6 coils required, as if its only 3, you'd need to insulate the base of the coils, and connect the extra male plug to that base, or the wasted spark principle wouldn't work. Might even be painfull
Still searching for the mod. dude i would pressume that they have moved the coil pack for ease the coil pack is 6 coils in 1 unit
_________________ RIP SCOTT |
|||
Top | |
EBGizmo |
|
|||
|
I'm pretty sure its only 3 conventional coils, just wired different. 2 cylinders spark at the same time when each one fires, but one spark is wasted each firing (probably the one that is TDC on exhaust stroke, so it has no effect) The trade off would be cooler individual coils, and longer dwell time, but the output spark power is halved, as each side of the coil outputs goes to an individual plug, and they meet in the middle at engine earth. Each coil in the 3 pack has to generate a spark that needs to travel across 2 gaps at the same time, so I have my doubts as to how efficient this system is. Seems to mean that if you have one faulty spark plug, it will affect its partner plug on the same associated coil.
_________________ EF II Sedan
|
|||
Top | |
Who is online |
---|
Users browsing this forum: galapogos01 and 100 guests |