Hey guys im going to need some help

i can get hold of a gearbox out of an EA with peddle box bellhousing ECU cluch cabling tailshaft and flywheel every thing i need may have not

i need to know how to do it as i have never attempted to do any thing this hard, i need a run down on what i need to do and how to do it, and one thing i kneed to know is where is the ECU is so i can change it to the manual one,

im using an ea box as i belive it has a smaller ratio is this true

i have the tools i need i think trolly jack stands spanner set socket set few other tools and Beer

would anyone be able to help if i got the box

im in SA

thanks Tom

the ECU is located at the passenger side near where the passengers left foot sits. it has 2 plugs holding the cover in, take them out remove the cover and unplug the old ECU, be sure not to bend the pins when doing so. it has a setup so that when you undo the bolt ontop of the plug it will automaticly remove the plug.

youl need, manual gearbox, tailshaft, diff, computer, cluthch, pedal cluster, um manual console and boot, Manual ECU, ahh im sure theres more but im a bit tierd at the moment. if your having major problems drop me an email and ill try and help out as best i can over the net, we did the conversion to my brothers EA