|
| GIANT |
|
|||
|
hello dus enyone have a tach sheet or a site that help with manual conversions i just hade mine dun and i am having a cuple of problems mt speedo dusent work and there is a grinding noise when i have my cluch out eny help is wellcome plzzz
i have looked under the car at the gear box and there is 2 red and black little pluges and 2 orende and black pluges thay are all pluged in dus enyone no with one controles the speedo and km plzz help me lol cheers ross
_________________ EB 92
|
|||
| Top | |
|||
| GIANT |
|
|||
|
sorry about the spelling i was in a hurry eny help is welcome plzz
_________________ EB 92
|
|||
| Top | |
|||
| Sipheren |
|
|||
|
search
|
|||
| Top | |
|||
| voxace |
|
|||
|
Speedo sender has a White, 3 pin plug.
|
|||
| Top | |
|||
| GIANT |
|
|||
|
yer i have check that that is all good i duno what ellc it could be is the auto ecu and the manual the same or would that be doing htis cos ihave a auto ecu
_________________ EB 92
|
|||
| Top | |
|||
| opto |
|
|||
|
Fuk didn dey tichya ta spik n rite n skule
_________________ I post here cos the russian tank driver doesn't |
|||
| Top | |
|||
| GIANT |
|
|||
|
what dus that last most sya in english sorry
_________________ EB 92
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
GIANT wrote: yer i have check that that is all good i duno what ellc it could be is the auto ecu and the manual the same or would that be doing htis cos ihave a auto ecu
your first problem is running the car with the auto ecu. you can by pass the siginals sent from the ecu to the trans. to stop it from trying to shift gears. im not sure how to do but if read on here many times about it so do a search. with your grinding noise, if it only happens when you push the clutch in then it will be an incorectly fitted throw-out bearing or f**k throw - out bearing wither way the box is going to have to come out and this needs to be inspected. did you do the conversion or was it done by a mechanic etc. cheers
_________________
|
|||
| Top | |
|||
| GIANT |
|
|||
|
the griding is when i let the cluch out so when it is siting there ideling it like ratels and grinds sound bad is that the same hting dus the box need a bit of a recon ?
i will havew a look about the ecus thnx for the hwlp mate cheers ross
_________________ EB 92
|
|||
| Top | |
|||
| voxace |
|
|||
|
Could be bad case of nuetral rumble, or could be what I had when mine was making a similar noise ages ago - the throwout bearing.
I just used a second hand one when I first got my manual conversion done and that was the cause. The noise has gone away now after replacing the clutch and the throwout bearing. Do a search on how to trick the auto ECU, I found no difference between running either. |
|||
| Top | |
|||
| pull85 |
|
|||
|
i had the grinding problem on my car when i put a new clutch in,
when i release the clutch a grinding noise appeared but wasnt that noticab le i only heard it when i was in the hungry jacks drive throughs n stuff close to walls so it echoed a little...... anyway i just left it..... it went away prolly not the best help but thats what i did. |
|||
| Top | |
|||
| GIANT |
|
|||
|
i will ge tthe box out and see what thay think about it then thnx for the help
_________________ EB 92
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 89 guests |
