|
| bowsaw |
|
|||
|
I have lost my manual, so can someone enlighten me how to get the tension off the belt, so i can replace alt, i remember something about a hole and a 5mm drill bit!!!!
|
|||
| Top | |
|||
| Maco |
|
||
|
No No No
take out the fans get a 3/4" or was it 1/2"? breaker bar and insert into the tensioner. There is a spot for it on the lower pulley. Then just pul on it towards the left side of the car. That easy
_________________ A goooli gooo goo |
||
| Top | |
||
| Disco Frank |
|
|||
|
MACO IS BACK ALEX MAN HOW IS YA!!!
ohh yer neil what he said but i neva had to take fans out it extra work!
_________________ RIP SCOTT |
|||
| Top | |
|||
| madmax |
|
|||
|
Maco wrote: No No No
take out the fans get a 3/4" or was it 1/2"? breaker bar and insert into the tensioner. There is a spot for it on the lower pulley. Then just pul on it towards the left side of the car. That easy Ever so close, but no cigar! 3/8" drive breaker bar it is. You need to turn it clockwise to loosen it
_________________
|
|||
| Top | |
|||
| Happy |
|
|||
|
yes, but to hold it ford say a 5mm drill bit in a small hole which will keep the tensioner turned for you. I suppose there is more than one way to get a wog drunk, i mean skin a wog, ahh f**k... cat!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| joolz |
|
|||
|
man all i did was pull on the top part of the belt then wedge a small nut about 10mm wide in the gap at the tensioner, i didnt need any 3/8 drives or take out the radiator.
|
|||
| Top | |
|||
| madmax |
|
|||
|
joolz wrote: man all i did was pull on the top part of the belt then wedge a small nut about 10mm wide in the gap at the tensioner, i didnt need any 3/8 drives or take out the radiator.
You don't have to take out the radiator!
_________________
|
|||
| Top | |
|||
| joolz |
|
|||
|
no you dont this way, the reason you have to take it out the other way is so that you can get the ratchet in there!!
|
|||
| Top | |
|||
| madmax |
|
|||
|
joolz wrote: no you dont this way, the reason you have to take it out the other way is so that you can get the ratchet in there!!
You must be using a hell of a large ratchet! all I need to do is remove the fans (1 min job) but I'll tell you what you do it the way you feel most comfortable. I prefer to remove them with the tension taken off
_________________
|
|||
| Top | |
|||
| joolz |
|
|||
|
not many ppl have a drive that size and its less than 20 seconds to put a wedge on the tensioner just right to the left bolt after pulling up at the top of the belt, the reson i found this way is cause i didnt have a drive that size so i improvised!
|
|||
| Top | |
|||
| concorde |
|
|||
|
i just replaced both my pulleys, didn't have to remove the fans or radiator and i have no special tools. i just placed a bar between the alternator and the tensoined pulley and placed the belt on the power steer once i had enough slack.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 71 guests |
