|
smally351 |
|
||
|
Getting sick of my 4.0 AUII wagon. The headgasket was done at 45,000km and I think its just starting to go again at 75,000km. Also sick of the lack of power down low, especially when towing a trailer.
I am considering converting to a 5litre from AU I, II or III. Has anyone done this before, or can think of any traps i might encounter along the way? I have sent an enquiry off to FTG Salvage to get an idea of part costs. Any info would be appreciated.
_________________ Real Cars have Chrome Bars |
||
Top | |
Disco Frank |
|
|||
|
dude
it will require everythign in the frotn of the firewall to be removed/replaced ie all engine and wiring components including the engine bay wiring looms a new ecu a new dash cluster then i think the gearbox is slightly different lots and lots of work! u are better either A spend some $ on a cam, exhaust intake for a good increase in power b sell yours and buy a v8 and 3 if the head gasket was done at 45000kms should have been under warreny and should not be going at 30thousand kms later i would be back to the mech on that!
_________________ RIP SCOTT |
|||
Top | |
smally351 |
|
||
|
V8 wagons are a rare breed, not even sure you could get one in an AU from Ford, I know you can't in the BA/BF.
Don't mind the work, I'm a mechanic by trade, so that side of it doesn't worry me. The headgasket was done under warranty. Ford only give you 12 months / 20,000 km warranty on their work don't they? Ive had a guts full of the lack of grunt below 3000rpm. This is only the kids taxi, but Im getting blown off by Camrys on the way to school!!!!
_________________ Real Cars have Chrome Bars |
||
Top | |
Vic |
|
|||
|
Yes you can get V8's in the AU's.
_________________ 5.6L of carbon footprint. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 30 guests |