hi

i just got a diff from a ed xr and want to put it in my ea
i noticed that the pinion yolks are different the ed has a round flange wih the uni clips on the outside and the ea has a saddle type flange(uni joins strait to yolk).with uni clips on the inside
will i have to get a different tail shaft or will i have to get a custom uni...
or do you think the uni's are interchangable....???????????

 

 

Attachments:

File comment: ea universal ea uni.jpg [ 81.13 KiB | Viewed 180 times ]

File comment: ed universal ed uni.jpg [ 97.3 KiB | Viewed 176 times ]

hmm that ed one looks a bit cRusty and yeah??

Okay, you need to change the flange on your EA diff on to your ED diff, Not hard at all, Or get a EB2-ED tailshalft (better option)

Also, You need to do something with the rear lower control arms, EA's had smaller bushes with the rear control arms, EB2-ED had bigger ones.

What you can do is use your EA ones, press the rear bush out (where it joins the diff housing) and put a EB2-ED one in .

Done & done .

yea its a bit rusty its been sitting outside for the last 5 years
the tail shafts bent due to the car hitting a pole..
i used it to show the difference...

ok
so the flange on the diffs are interchangable..??
if so cool !!...i will just change the flanges over because i will put the ea diff in the ed so i can sell it..
thanks