|
| mitchg911 |
|
|||
|
gday,
i got a new car the other day 5l el ghia 
anyway, ive noticed there is a bit of a miss at light throttle.. also the brakes are s**t, but i think that may be another issue i havent had alot of time to chase it, but there is no obvious vac leaks and she has 21"of mercury at idle which im told is spot on.. the car idles perfect runs great when you get up it, but if your just lightly accelerating it misses and stumbles (most of the time) any thoughts? i havent had a chance to service her yet, planned for tuesday, however i did pull the MAF out and its nice and clean -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
plugs/leads and filters
air and fuel filter then do the oil and oil filter once these are done you know when they were done and with what brands if the miss is still there u can look else were.. maybe even a ECU reset could help brakes may just need new fluid and a good bleed
_________________ RIP SCOTT |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
yep
all of the above planned for tuesday. for some reason the guy i bought it off used to keep it with the battery d/c.. so the ecu has been reset numerous times.. im thinking the brakes may be sticking on the slides.. as we went for a belt the first night i got it and the back rims are filthy.. (were clean) but the fronts were far cleaner.. will pull it apart and have a look... --mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
could just be a really s**t super soft pad on the back?
mm i had my slides stick on my au once and all i got was uneven pad wear on either side of the disc
_________________ RIP SCOTT |
|||
| Top | |
|||
| Samantha |
|
||
|
if plugs, vac, and leads are ok it could be o2 sensors. When you tramp on the accel what happens? How many kms on the car?
|
||
| Top | |
||
| paulhowes |
|
|||
|
If it has the tube hanging off the induction half way between the air box and the throttle body then have a good look as sometimes people do this clamp up too tight and slightly crush the tube and it can suck air in that has not come past the MAF dependant on the rate of air leakage this can cause this as well. Mine was crushed so I took it off and sourced a blanking cap from plumbing supplies the right diameter and sprayed it black and clamped it in.
Other than that do the usual checks including the $40 new fuel filter as this wont hurt. |
|||
| Top | |
|||
| -clampy- |
|
||
|
yeh sounds like you're missing 5 litres there ay
have you looked under the bonnet?
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| mitchg911 |
|
|||
|
haha i was waiting for that..
it only does it on very gently acceleration (ie cruise control) or if your just takling of gently from a set of lights etc... ive got a big service for her today incl new leads plugs filters etc etc etc btw what oil you guys run? ive got hpr15 will this be good enuf? or should i exchange it for sumthing thinner.. btw the car had 147000kms cheers guys the sound of a v8 is soo much nicer than my old 6
converted for life... -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| One Drone |
|
|||
|
Should be asking Jaysen for all this stuff mate!! lol..
HPR15 is fine. As for the miss, do dizzy cap + rotor, plugs, leads and it should be fixed. Usually is one of those. Only use Ryco or Genuine filters.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 41 guests |
