|
| ebs_4l |
|
||
|
i missed what was said, but yes, definately tig welds, and i think they look pretty good -but that may be cos' i did them. CHEF, you are spot on there, the only other guy in my area that has a tig charges like a wounded bull for it. he has a seperate labour rate for tig welding, i'd hate to be paying him to do what ive done on the manifold, it would be about $350 worth of welding im guessing
anyway, i hope these pics show a bit more detail 
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| Bsjenko |
|
|||
|
i withdraw any comments i made. they are sweet welds, sorry.
must have just been the pic, or how i was looking at it. looks like a killer setup though!!
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| ea_5_spd |
|
||
|
hey brad
thats way better than ya first manifold! i might have 2 start savin hey!!!!!!!!!
_________________ mods: pacemaker extractors, 2.5in red back ,lowered with pedders 17" rims, extreme h/d ceramic clutch, 3.45 ef lsd, and rear brakes, clear indicators, ef thermo's, stage 2 crow (daily) |
||
| Top | |
||
| opto |
|
|||
|
I think you have done an awsome job there, also looks like it will flow extremely well.
I presume you used steam pipe for pipe strength so holes wouldn't blow thru. Now, has anyone got one in use at the moment and what are the figures ? Would love to see a set polished and ceramic coated.
_________________ I post here cos the russian tank driver doesn't |
|||
| Top | |
|||
| ebs_4l |
|
||
|
correct, it is steampipe, which is arund 3.5mm thick.
no-one but me has one of these as yet, (havent been able to sell any) mine will be ceramic coated by the end of the week, and hopefully will be running and tuned within the next month, so i will supply my results then... 
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| spack-pilot |
|
||
|
you should try making and selling the collectors...
i would buy a few... cheers |
||
| Top | |
||
| huggiebear |
|
|||
|
if i had the $$$ to turbo id buy one thats for sure
|
|||
| Top | |
|||
| ea_5_spd |
|
||
|
thats looks better!
_________________ mods: pacemaker extractors, 2.5in red back ,lowered with pedders 17" rims, extreme h/d ceramic clutch, 3.45 ef lsd, and rear brakes, clear indicators, ef thermo's, stage 2 crow (daily) |
||
| Top | |
||
| turboef |
|
||
|
very nice job , lets know ur power figures when its up and running with that manifold
|
||
| Top | |
||
| theboss290 |
|
||
|
Very nice I might be interested later this year in getting one.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
