|
| Ryan0001 |
|
|||
|
the fan belt seems to be rubbing on the tensioner arm. as it comes off the water pump pulley it goes around the bottom tensioner pulley, its rubbing on the arm of the tensioner, causing the edge of the belt to start to fray... after a few weeks the belt splits a little and it gets ripped to shreds.
i had to pull the water pump pulley out a little because the belt wasnt running on it properly, which i thought would fix it, but the belt is still rubbing on the tensioner 
ive used a few washers on the tensioner bolts to try and space it out a little further, but its still rubbing. anyone else have this problem and know any fixes?? cheers lads and lasses |
|||
| Top | |
|||
| x3ros |
|
|||
|
from the sounds of it, i have a similar problem...though not quite as bad,
the problem for me (and possibly you) is a warped belt tensioner, apparently its a well known problem, it warps out of shape and appears normal..but while the car is driving it starts bit by bit to pull it off hope this helps
_________________ 2003 BA Ford Falcon XR6 | BF Typhoon Intake + K&N Filter | Lukey 2.5" catback zorst | More mods coming soon.... |
|||
| Top | |
|||
| Ryan0001 |
|
|||||
|
this might help explain the situation better...
its rubbing where ive circled
|
|||||
| Top | |
|||||
| smoke_ |
|
|||
|
your harmonic balancer hasn't slipped at all?
at my work we had an ef come in which had this same problem, and he was complaining about a knock noise. the harmonic balancer was sliding back and forth, you could visually see it.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Ryan0001 |
|
|||
|
where is that and how do i check it?
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
it is driven off the crankshaft.
it's the really big lower pulley.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| wk |
|
||
|
There's only two reasons why you have your prob.
1. you need a new tensioner 2. Your harmonic balancer is about to fly out. Its most likely that you need a new tensioner. |
||
| Top | |
||
| jessev1983 |
|
||
|
i reckon you've got a warpped tensioner, i've had one before on a EF before.
_________________ 97 EL Fairmont Ghia I6
|
||
| Top | |
||
| Ryan0001 |
|
|||
|
thing is ive already replaced the tensioner... this one is only a few months old!
|
|||
| Top | |
|||
| x3ros |
|
|||
|
when you get yourself a new belt tensioner, let me know how much it set you back.... i need one too!
_________________ 2003 BA Ford Falcon XR6 | BF Typhoon Intake + K&N Filter | Lukey 2.5" catback zorst | More mods coming soon.... |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 103 guests |
