|
| Mako |
|
||
|
Ok i am getting a new cam installed in my EL fairmont, and i have read that people have changed their "hydraulic lash adjuster retainers" when they fit the extra shim.
now i just rang ford and they have no idea what i am talking about. they tried to sell me a whole lifter? do i not need them with an EL... or could the guy at ford not see them on the computer? or am i just an idiot... and using the wrong name or something stupid? or do i just go to repco? 
Help... Thanks 
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| voxace |
|
|||
|
Yeah I don't think ford really stock them. Repco/Bursons etc do. They don't cost much and are sometimes called a 'lifter repair kit'.
They are just little 'O' shaped seals. |
|||
| Top | |
|||
| Mako |
|
||
|
voxace wrote: Yeah I don't think ford really stock them. Repco/Bursons etc do. They don't cost much and are sometimes called a 'lifter repair kit'.
They are just little 'O' shaped seals. Thankyou. I will pop past repco tonight on my way home... with my new (getting installed now) PH4480, high flow cat, and 2.5 exhaust 
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| 4.9 EF Futura |
|
|||
|
Mako wrote: voxace wrote: Yeah I don't think ford really stock them. Repco/Bursons etc do. They don't cost much and are sometimes called a 'lifter repair kit'. They are just little 'O' shaped seals. Thankyou. I will pop past repco tonight on my way home... with my new (getting installed now) PH4480, high flow cat, and 2.5 exhaust Mmmmm. Is loud, is good 
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| Mako |
|
||
|
/sigh
my local repco could only sell me the whole retainer? which were $30 each! i said i only wanted the seal, and they said try ford (where i have already been):( oh well i have another store in frankston and a bursons, i will have to try them tomorrow.
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| jimxr6 |
|
||
|
i have a set that i bought for $26 but wernt needed you can have them for $10 can arange to meet you some where if you are in sydney western sub.
if anyone else is interested they can have them. |
||
| Top | |
||
| kodak |
|
||
|
Give this guy a go
GPE Cylinder Heads & Engines Fctry 2/ 173 Wellington Rd Clayton VIC 3168 ph: (03) 9560 0944 he got them in for me and gave some good advice |
||
| Top | |
||
| Mako |
|
||
|
Thanks guys PM sent to jimxr6... otherwise i will give GPE a go.
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| pepsimax |
|
|||
|
they are called lifter shims and ford sell em for about $3 each
_________________ NO ONE DIES A VIRGIN AS LIFE SCREWS US ALL |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
