I am looking for two pairs of radio brackets from the mid series head unit as I need a pair for my MP3 player for the NF.

I managed to drill some new holes in the original brackets, however due to the size of the head unit, it was that bit oo wide, so I had to cut one bracket in half to fit the unit.

The head unit sits about 5mm too low and leaves a gap in the top.

How can the head unit sit swuare in the hole.

If I can get another pair, these will go on the stock HU, just in case the MP3 gets removed prior to selling of the NF.

The way the unit is mounted right now. Any advice on making it look "pro-fitted".

either make the bracket holes a little higher, or do what i did and use the spare holes in the head deck, drill your bracket ones out in the right spot, and use 2x small screws with the same thread as your head deck.