|
| yuey-oh |
|
||
|
hi guys great forum you got here.
i have an aU xr8 that is blowing out black smoke. spark plugs and leads are fine as i just took it for a service and had them changed. my exhaust has turned from chrome to black and the black smoke gets worse when i put my foot down. hope its not too expensive to fix.... thanks |
||
| Top | |
||
| XR8Chic |
|
|||
|
Black smoke usually means its running rich - a lot better than burning blue smoke, and not quite as fun as white smoke.
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| alfy |
|
|||
|
yeah my ED's got the same problem, but only when u start it up and rev it. and it smells like s**t.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
First thing I'd try is to clean the MAF.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| qwerty68 |
|
|||
|
i had problem with my eb and i changed sparg plugs and it fixed the problem
_________________ Lukey Extractors 2.5" Exhaust 3.23:1 Diff 17" BA XR8 Alloys |
|||
| Top | |
|||
| yuey-oh |
|
||
|
{USERNAME} wrote: First thing I'd try is to clean the MAF. how do i do that??? {USERNAME} wrote: i had problem with my eb and i changed sparg plugs and it fixed the problem
irridiums have already been put in about a month ago and leads checked |
||
| Top | |
||
| Vic |
|
|||
|
{USERNAME} wrote: First thing I'd try is to clean the MAF.
I agree. A prime suspect is the MAF.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
How much black smoke?? And is the engine performing ok??
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| yuey-oh |
|
||
|
{USERNAME} wrote: How much black smoke?? And is the engine performing ok??
at idle there isnt much at all, but at full throttle there is quite a bit |
||
| Top | |
||
| philaddis |
|
|||
|
O2 Sensor?
_________________ ED XR8 Spri-mitatio-nt |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Does sound like its running way rich... i thought maybe ECU was in limited operation strategy but this results in black smoke even at cruising speeds...
Yeah clean sensor wires in MAF.... maybe get it onto a dyno to see how rich it really is running....
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
To clean the MAF take it off the airbox and carefully remove the electronics. You'll need a security Torx bit to remove the electronics. You can buy them at tool places.
Clean the two wires with carby cleaner, be gentle so they aren't damaged. I just sprayed carby cleaner on mine til it was clean, I didn't rub them or anything. Let everything dry, reassemble the MAF and refit it.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 13 guests |
