Fordmods Logo

Ford Premium sound, subwoofer 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Ford Premium sound, subwoofer
Posted: Thu Mar 23, 2006 2:21 pm 
Tyre Shredder
Offline

Posts: 398

Joined: 9th Mar 2006

Ride: Falcon

Location: Sydney
NSW, Australia

I have an EL Ghia with premium sound. Want to replace the little sub in the parcel tray with a better quality sub.

How do you get it in/out without messing up the carpet on the parcel tray.

Can it be taken from underneath??

 

_________________

EL Fairmont Ghia, extractors, 2.5 inch system, high flow cat, K&N panel filter, AUXR Snorkel, 3.45diff 0-100km/h 6.9secs

SS COMMODORE LS1 282rwkw, awesome power

Top
 Profile  
 
 
Posted: Thu Mar 23, 2006 2:46 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

The parcel shelf has to be removed to pull out the 8" sub. The small nuts on the underside of all speakers in sheft have to be removed (3 nuts each for outer speakers and 4 for the sub) the baby harness mount has to be removed along with the plastic plugs/pins. The carpet that folds up under the front of the shelf also has to be peeled back. Carefully remove parcel shelf to gain access to the sub. The centre belt cannot be removed in this process so just work around it.
Top
 Profile  
 
 
Posted: Thu Mar 23, 2006 2:53 pm 
Tyre Shredder
Offline

Posts: 398

Joined: 9th Mar 2006

Ride: Falcon

Location: Sydney
NSW, Australia

Thanks,

seems like too much muckin around. May just add a 12 inch in the boot, be easier.

The speaker when cranked abit makes the back parcel tray rattle quite a bit. Sounds a bit silly. Want to reduce the rattle??

How??

 

_________________

EL Fairmont Ghia, extractors, 2.5 inch system, high flow cat, K&N panel filter, AUXR Snorkel, 3.45diff 0-100km/h 6.9secs

SS COMMODORE LS1 282rwkw, awesome power

Top
 Profile  
 
 
Posted: Thu Mar 23, 2006 7:17 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

its not that hard to take out the parcel shelf......well i guess it wasnt for me cause all the seats were out. do what EB V8 said but if u want u can undo the seat belt bolt that holds down the centre seat belt and squeeze it through the hole which the seat belt passes through the parcel shelf. other then that u can just take the parcel shelf off and push it aside....doesnt take much work i dun think

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Thu Mar 23, 2006 10:29 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

If you want better bass on the cheap side just add a boxed sub off the factory amp. I did for a while until i upgraded my whole system. The bass whas alot better than the factory sub and it was only a 10" jl sub.
Top
 Profile  
 
 
Posted: Fri Mar 24, 2006 12:41 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1104

Joined: 10th Nov 2004

Gallery: 10 images

Ride: Isuzu MU-X ,2018 Kia Cerato

Location: Mackay
QLD, Australia

the factory amp is only good for powering the factory sub. if you going to replace the sub make sure you repalce the amp as well or add another one in, because you will find it will probly sound worse.

 

_________________

'96 DF II LTD 6cy
'15 Isuzu MUX LST

Top
 Profile  
 
 
Posted: Sun Mar 26, 2006 10:12 am 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

I beg to differ on that! the factory sub has a 6ohm rating so its not running to hard as the parcel shelf will just rattle.
The factory sub is also on the cheap side, i had a boxed 10" JL audio dual voice coil sub running off it at 4ohms and there was a huge improvement.
About 6 months later i upgraded the whole system, there are pics in my gallery.
Top
 Profile  
 
 
Posted: Thu Apr 13, 2006 5:24 pm 
Smokin em up
Offline

Age: 37

Posts: 274

Joined: 22nd Feb 2006

Ride: AU 6

Location: Geelong
VIC, Australia

yeah ive done the same, im running a 10 in my au from the factory amp and it pumps. its rated at 1000 watts as well the subby.
Top
 Profile  
 
 
Posted: Thu Apr 13, 2006 7:12 pm 
Getting Side Ways
Offline
User avatar

Age: 86

Posts: 1235

Joined: 7th Apr 2005

Gallery: 7 images

Ride: GTHO PH 1 EF ex chaser

Location: Willow vale, GOLD COAST
QLD, Australia

voids wrote:
the factory amp is only good for powering the factory sub. if you going to replace the sub make sure you repalce the amp as well or add another one in, because you will find it will probly sound worse.

not true i HAVE 12"SUB RUNNING FROM FACTORY PREMO SOUND AMP and it is quite good almost lifts the boot if it isn't om the catch :roll: :D :D

 

_________________

Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari!

Top
 Profile  
 
 
Posted: Thu Apr 13, 2006 7:28 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

geez, bet your grandkids love you :D

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 1:45 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names