|
Stevo |
|
|||
|
Hey there, i noticed Gunit18 was selling 24lb injectors and a 77mm maf.
Would these injectors fit , and the maf fit up to a stock EL V8 (165kw), and work ok? Would i see any benefits, or is it way to overkill ? Steve |
|||
Top | |
DjeMz |
|
||
|
{USERNAME} wrote: Hey there, i noticed Gunit18 was selling 24lb injectors and a 77mm maf.
Would these injectors fit , and the maf fit up to a stock EL V8 (165kw), and work ok? Would i see any benefits, or is it way to overkill ? Steve hi stevo, they will fit, but will be over kill-with a stock motor.your stock injectors can handle up to 200-205kw before you have to use the 24lb- ers, you will need cam,manifold,zorst,maf,throttle body changes to use them. AS THEY SAY-MONEY IS POWER,HOW MUCH DO YOU WANT? |
||
Top | |
DjeMz |
|
||
|
hi stevo, they will fit, but will be over kill-with a stock motor.your stock injectors can handle up to 200-205kw before you have to use the 24lb- ers, you will need cam,manifold,zorst,maf,throttle body changes to use them. AS THEY SAY-MONEY IS POWER,HOW MUCH DO YOU WANT?
|
||
Top | |
XR9UTE |
|
||
|
They will work if the MAF was designed for use on vehicle that originally had 19lb injectors and 55mm MAF. You'd have to ask gunit18 about that.
It is certainly overkill for a stock engine but I assuming you are going to modify it? In which case it will be the perfect setup. Pete. |
||
Top | |
millard455 |
|
|||
|
is that 200rwkw or 200fwkw b4 injectors need upgrade??
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
Top | |
offyaguts |
|
||
|
It would be a good buy if your were to do everything else in the future....otherwise, bit of a waste of money
...and 19lb injector generally run out at around 180rwkw.....can bump up the fuel pressure to try and squeeze a bit more out of them but duty cycle will be too high |
||
Top | |
Stevo |
|
|||
|
k thanx for your replies guys.
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 44 guests |