|
| ELXR6lookalike |
|
||
|
hey guys, just a quick one how can i recognise an XR6 motor except the obvious red rocker cover and then T engraved onto the front of the head, possibly numbers on the block or build plate any help is much appreciated cheers in advance
|
||
| Top | |
||
| XR6EB |
|
||
|
engine wise, thats it. Unless there is some one else knows another way.
_________________ EB S XR6
|
||
| Top | |
||
| data_mine |
|
|||
|
If it's and XR, or a EF2/EL Ghia then it'll have one.
But yeah, the 'T' stamp on the head is the best way (everythign else can be faked easily). edit: Oh, the head part number will start 94DT or 96DT. Non tickford will be 94DA or 96DA.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| arm79 |
|
|||
|
data_mine wrote: If it's and XR, or a EF2/EL Ghia then it'll have one.
But yeah, the 'T' stamp on the head is the best way (everythign else can be faked easily). edit: Oh, the head part number will start 94DT or 96DT. Non tickford will be 94DA or 96DA. And don't forget about head part number 95DT for a ticky head. Non Tickford also includes 95DA in the above lists. Only the head and fuel reg was different. Everything else (block, bbm, etc) is exactly the same. I think the compliance plate has X stamped as the engine type... I'll check when I got for lunch and look under the bonnet. |
|||
| Top | |
|||
| ELXR6lookalike |
|
||
|
oh i see...thankz for that it helps alot
|
||
| Top | |
||
| stomper |
|
|||
|
My old work had a EL tickford motor sitting there they never got started cause most the electrical was f**k over in the accident but the motor stayed in tact. Is there a way of putting the EL tickford in my EF GLi.
What do i need to do?
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
you should'nt have any problems with it going in. as lone as you use your wiring harnes.
|
||
| Top | |
||
| Soulfire |
|
|||
|
yaeh the engine code is "X"
|
|||
| Top | |
|||
| stockstandard |
|
|||
|
stomper wrote: My old work had a EL tickford motor sitting there they never got started cause most the electrical was f**k over in the accident but the motor stayed in tact. Is there a way of putting the EL tickford in my EF GLi.
What do i need to do? pull the dizzy out and put the sequencer from the EF engine it, use the EF loom and ECU. I would also swap the fuel reg from the EF otherwise it will run too rich.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 103 guests |
