|
| stomper |
|
|||
|
There is a boot lid rattle from the 12 inch in the boot. This makes the boot lid rattle alot. People have told me to use sound dampener but costs too much.
Can i just pack the cavity of the lid with filler foam? or is there something else i can do.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| jdas |
|
||
|
no gaps bro but its messy n a prick if u wanna do a custom display on the boot lid later on, also u can buy some weather stripping 2 run around the boot lid if there is any rattle there as well...
_________________ negelecting my ute to ride my two wheeled rockets |
||
| Top | |
||
| Molloy |
|
|||
|
mines got boot rattle, walk up and push the number plate in and it goes away, i just stuffed a cloth behind it.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| kermey |
|
|||
|
my sub made the sheet metal brake away from the spine of the boot! just use some silcone, foam tape or sound deadener!
|
|||
| Top | |
|||
| stomper |
|
|||
|
yeah i got rid of the number plate rattle by putting a big dab of silicon under it and using 4 tech screws with silicon in the holes.
So use some of that no gaps stuff. Is that in the boot lid cavity? Im guessing so. And a weather strip... I think ill use one where the boot meets the rear windows cause if i press there its a little less rattle cheers all
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
