|
| GTBob |
|
|||
|
Slabz wrote: xr Rob wrote: with ya new speekers there should be cable that comes with them cut the end with the clips off and cut the plug off the stock wires twist together solder tape and your all set i dont know what solder tape is exactly but it sounds dodgy as... i say there are three options: 1. terminal strips - quick, easy, reuseable 2. crimp lugs - also fairly quick, easy and reusuable 3. soldering - fidliy, you need a soldering iron, gives the best sound result NEVER use sticky tape to hold two wires together like my mate does  You didn't read the post properly he should have put a comma after solder so it reads solder(wires)tape them up ALL ok then 
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| xr Rob |
|
|||
|
GTBob wrote: Slabz wrote: xr Rob wrote: with ya new speekers there should be cable that comes with them cut the end with the clips off and cut the plug off the stock wires twist together solder tape and your all set i dont know what solder tape is exactly but it sounds dodgy as... i say there are three options: 1. terminal strips - quick, easy, reuseable 2. crimp lugs - also fairly quick, easy and reusuable 3. soldering - fidliy, you need a soldering iron, gives the best sound result NEVER use sticky tape to hold two wires together like my mate does You didn't read the post properly he should have put a comma after solder so it reads solder(wires)tape them up ALL ok then what gtbob said my bad
_________________ If you think life is bad. Imagine being a egg...you only get laid once, you only get smashed once and the only bird that sits on your face is your mum! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 30 guests |
