|
| Molloy |
|
|||
|
Ok Im going the Powerdyne stage 2 supercharger kit from Capa, I will be putting it onto my 2nd EF. The Engine has extractors and zorst other then that it is total stock and is a auto, it has 194000kms on the clock, it seems to run in good nick no leaks dosent blow any smoke or go through oil and water. Ok ive been reading through the forced induction section and most people say that the stock engine will be ok for for 6-10psi?, as the stage 2 Powerdyne kit is set to run on 9psi, this should be fine with a stock engine?. What im worried about is the tune, capa supplies a chip to go with the kit, Once this chip is pluged into the Falcons ECU will it need to be tuned? or should it be plug and play stuff? as this car is going to be my daily driver I dont want it to be running like a*** and detonating or under fueling or anything, should the chip from capa stop all this from happening?
i plan to get a programable ecu later on, but while the falcon has the kit bolted on it will not be getting any other mods done to it so it should be fine to keep the piggy back chip on it. Soz for the noob questions, but im a total boost newbie thanks lads.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| downingj |
|
||
|
It'll be interesting to see what she pulls on the dyno / down the quarter
|
||
| Top | |
||
| nannas_ed |
|
|||
|
i would say the chip supplied from capa would be that similar to a unichip and yes it would have to be tuned for the car.
_________________
|
|||
| Top | |
|||
| Molloy |
|
|||
|
indeed it will, ive done the reading on the Powerdyne and vortech blowers and have decide to go Powerdyne due to money reasions, and dont wish to go past 9psi,
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Molloy |
|
|||
|
nannas_ed wrote: i would say the chip supplied from capa would be that similar to a unichip and yes it would have to be tuned for the car. dam, all the guys around my area have noooo qlue how to tune cars even though they claim 2, ive had mates skylines die and need repairs due to bad tunes, theres just not many people in my area that can do a good job,
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Steady ED |
|
|||
|
The CAPA chips are supposed to be pretty good as far as plug and play chips go.
Martin is happy with is. You can always run the chip as received till you got some more cash and can take it somewhere to be tuned on a dyno.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Molloy |
|
|||
|
ok, do you think the car will get detintation or any other probs with this kit without getting a tune? or do you think it should bolt up and all should be smooth.
or will it be a case of wait and see what happens?
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Molloy |
|
|||
|
ive asked capa and they said all should be fine, but some people tell you what u wanna here to sell there product.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| EDXR8 |
|
|||
|
Generally the CAPA tunes are very safe, they could probably squeeze another 10-20rwkw out of their kits quite easily with a more aggressive tune but then they would be running the risk of early failures. Obviosuly it would be best to get a custom tune, either through an aftermarket computer, a chiptorque or other edit or even a unichip, but if money is tight then the CAPA supplied chip is fine IMO.
|
|||
| Top | |
|||
| Waggin |
|
|||
|
*cough* Megasquirt?
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| Molloy |
|
|||
|
Waggin wrote: *cough* Megasquirt? ive heard of this megasquirt, what is it a type of ecu? programable?
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| EDXR8 |
|
|||
|
Molloy wrote: ive heard of this megasquirt, what is it a type of ecu? programable?
The megasquirt is a DIY programable computer although you can buy pre-built ones too. I have used one and have been quite impressed with its tunability and features. Further details http://www.megasquirt.info/ and a good place to order them is www.diyautotune.com |
|||
| Top | |
|||
| Molloy |
|
|||
|
interesting, ill look into this
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
