Fordmods Logo

What clutches are best for a manual falcon? 

 

Page 3 of 3 [ 44 posts ] Go to page Previous  1, 2, 3

 
Posted: Wed May 10, 2006 8:29 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

smoke_rubber wrote:
sweet dude, is that going in with your current setup or is it goin in with the motor you've got laying around?



it's on the car now. havn't started the engine yet though.
you must use a V8 clutch with that flywheel, when ordering it you have to ask for a light wieght neultral balance EFI windsor flywheel

i used an exedy sports tuff clutch, %40 more pressure then stock exedy XR8

the difference is huge, you need two hands to pick up the stock flywheel,
you can screw a bolt into the yella terra one and pick it up with one finger!!!!
Top
 Profile  
 
 
Posted: Wed May 10, 2006 8:45 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

sounds good.
it would be interesting how much extra power the light flywheel would make.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Wed May 10, 2006 8:50 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

smoke_rubber wrote:
sounds good.
it would be interesting how much extra power the light flywheel would make.


it wont make any more power..

but it should accelerate better. it's something like for every 2kg of the flywheel is close to takeing 40gk out of the car, this one is 8.5 kg and the stock one i think is close to twice that
Top
 Profile  
 
 
Posted: Wed May 10, 2006 8:53 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

ah ok, i thought it would pick up a bit more power, being that you also lose some through your driveline.
but yeah keep us posted on how it goes, i may have to get one

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Wed May 10, 2006 9:18 pm 
Smokin em up
Offline

Age: 38

Posts: 241

Joined: 8th May 2005

Ride: EF GLi 5-spd & BA 'mont

Location: Albury
NSW, Australia

Exedy Sports Tuff, Its a heavy duty, but still feels standard, i recommend it.

 

_________________

Sig pic removed, refer to http://www.fordmods.com/forums/signatur ... 29751.html

Top
 Profile  
 
 
Posted: Wed May 10, 2006 9:39 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 940

Joined: 10th Sep 2005

Gallery: 7 images

Ride: EL XR6

Location: Perth
WA, Australia

Picking up an Exedy sports tuff HD tomorrow, having it fitted Monday :)

 

_________________

5spd Heritage Green EL XR6. Wheels by ROH. Stereo by Clarion. Exhaust by Pacemaker & Lukey. Suspension by Whiteline, Durashock and K-Mac.

Top
 Profile  
 
 
Posted: Wed May 10, 2006 9:44 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

tickford_6 wrote:
smoke_rubber wrote:
sounds good.
it would be interesting how much extra power the light flywheel would make.


it wont make any more power..

but it should accelerate better. it's something like for every 2kg of the flywheel is close to takeing 40gk out of the car, this one is 8.5 kg and the stock one i think is close to twice that


I thought the stock was 12kg

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Wed May 10, 2006 9:53 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

don't touch extreme clutches they are absolute garbage. when I bought my current car it had one in there it was new, it weighed a ton, no slip no shudder, just heavy as hell, bought the car on condition they changed the clutch to a PBR heavy duty. its done alot of f^&king hard kays since I got it, I'm talking clutch dumps, over 100 kays a day of s**t sydney peak traffic, I have to slip the thing everywhere so I only expect ½ life out of it, its still a touch too heavy for my taste, so I will be looking round before to long to change, I'm not a brand loyalist when it comes to stuff like this I want what works..

I am even considering going the factory spec clutch cause it will be decent for traffic driving.

 

_________________

Image

I have a car.

Top
 Profile  
 
 
Posted: Wed May 10, 2006 10:00 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

You gotta be kidding, my Xtreme is the lightest clutch I have felt in any falcon.
Was it purple???

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Wed May 10, 2006 10:02 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

nah it was s**t lime green

 

_________________

Image

I have a car.

Top
 Profile  
 
 
Posted: Wed May 10, 2006 10:06 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Must be a different brand than what stockstandard and I are talking about then...

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Thu May 11, 2006 2:31 pm 
Smokin em up
Offline

Age: 38

Posts: 231

Joined: 8th Nov 2004

Location: Melbourne
VIC, Australia

Whats a rough figure for getting someone to replace a clutch?

 

_________________

1996 5spd EF2 XR6 - Genuine AJR's, full kit........

Top
 Profile  
 
 
Posted: Thu May 11, 2006 9:10 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 940

Joined: 10th Sep 2005

Gallery: 7 images

Ride: EL XR6

Location: Perth
WA, Australia

around $330-$400 depending on what you wanna get done, $330 was a base price JUST replacing the clutch, didnt einclude the price of machining the flywheel or anything like that

 

_________________

5spd Heritage Green EL XR6. Wheels by ROH. Stereo by Clarion. Exhaust by Pacemaker & Lukey. Suspension by Whiteline, Durashock and K-Mac.

Top
 Profile  
 
 
Posted: Thu May 11, 2006 10:33 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

ok got to drive the thing for the first time today...

the clutch feel is really really good, lighter then the stock replacment i had befor. the flywheel has made a difference for sure. very snappy engine now.

once the running is all over it's going on the dyno and to the drags
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 3 of 3  [ 44 posts ]  Go to page Previous  1, 2, 3

Who is online

Users browsing this forum: Google Adsense [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 10:19 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names