|
| Davey Gravy |
|
||
|
Just wondering if anyone could help me with the wiring on the BBM vaccuum switch?
I know the green/purple wire goes to pin 15 on the EL ECU, but does the red from the vaccuum switch go to earth? I've got the EMS 8860 wired up except for 3 wires(injector outputs & spout wire on dizzy) so i can drive the car to the dyno next week. BBM will go in over the weekend. This should sort out my leaning out problems!! Thanks, Dave.
_________________ EB Fairmont Ghia 6 -160rwkw (E85 tune) |
||
| Top | |
||
| snap0964 |
|
|||
|
The Red wire needs to be 12v IGN. The closest source would be the Idle speed solenoid (ISC). Since the wiring loom goes past the washer bottle, you should be able to locate it if you unravel the tape and conduit. The ECU pins are 5 or 57 if you need to continuity check the lot or just check from the ISC red wire.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Davey Gravy |
|
||
|
Thanks for the help
_________________ EB Fairmont Ghia 6 -160rwkw (E85 tune) |
||
| Top | |
||
| snap0964 |
|
|||
|
NP . . .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 63 guests |
