|
| danbode |
|
||
Age: 37 Posts: 708 Joined: 19th Jul 2005 Ride: 08 BF MK11 Fairmont Ghia Location: Manly west |
window washer, i have a problem that when i pull the window washer leaver no water comes out and it is full and all the pipes are conneceted wat is wrong?
|
||
| Top | |
||
| the_scotsman |
|
|||
|
Do you hear the motor spinning when you pull the lever?
|
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
open the cap clean the top of the bottle, then blow as hard as you can through it, does water come out, could just be blocked.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| joolz |
|
|||
|
A while ago i had my bonnet resprayed, went to use the windscreen washers and nothing cept for a dribble! i pulled out the hose going into the bonnet and it was kinked.
|
|||
| Top | |
|||
| x3ros |
|
|||
|
try and blow the hose out.... like dellboy said, if that seems clear...it could possibly be the water squirty pump is stuffed, or a loose wire somewhere along the line...
_________________ 2003 BA Ford Falcon XR6 | BF Typhoon Intake + K&N Filter | Lukey 2.5" catback zorst | More mods coming soon.... |
|||
| Top | |
|||
| the_scotsman |
|
|||
|
Wouldnt it be easiest to just pull the lever and listen...if there is a sound, blockage, if not...motor or wiring...pretty simple really...
|
|||
| Top | |
|||
| markr154 |
|
|||
|
Could even be the washer jets themselves, might be blocked.
Just use a needle and poke it into each washer jet hole / nozzle to see if that frees up any blockage there.
_________________ Hot Chilli Red EL XR6, 5-spd, JMM DEV 5 enhanced (161 rwkw custom tuned), Eliminator Switch Chip, 18" BA GTP rims, Pedders Superlows, BA XR6 badges, BA Sunroof, Pioneer Stereo, Splits, 6x9's, 10" sub, 700W 6-ch Viper amp.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 70 guests |
