|
[SH4UN0] |
|
|||
|
Hey guys how are we going, just a general question that i need to know asap due to my diff in my car is gone, it is almost giving up on me and i need a way to fix it without spending too much $$$$ on it.
i have been quoted by a mechanic that it could be anywhere from 1000 - 1600 to replace the control arms and the diff. I want to know if there is any cheap way of getting another diff that will bolt straight onto my 1989 EA spac 5 speed manual 3.9L WITHOUT ANY MODS TO THE DIFF. i will also need the axles I want to get out of this with the least amount of money possible as i am saving for a new car that i want to pics up in the near future.
_________________ The Ute's Numbers
|
|||
Top | |
samftr |
|
|||
|
hey man can you change the diff yourself? its not that hard, and to be honest 1100 bucks is a lot of money for the job done. i had to change the diff in my 87 model gn sigma, i spat the tailshaft and input spline sheared clean off. locked her up dead. cost bout 80 for the diff and six hours with a mate on the weekend. good luck with it
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
FPV_GTp |
|
||
|
http://www.fordmods.com/forums/viewtopic.php?t=28323
_________________ WANTED - Complete BTr4 and zf 6hp26 automatic transmission 6 cylinder and V8 transmission(s) suit rebuild? Drop me a PM if you can help would be greatly appreciated - thanks |
||
Top | |
Eu-GenixX |
|
||
|
in bloody melbourne again.. heh
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 18 guests |