|
| Mike Gould |
|
||
|
Does anyone know what is entailed in changing the antenna mast on A Falcon AU II :evil:
|
||
| Top | |
||
| Disco Frank |
|
|||
|
yes
jakc passengert side up and remove front wheel take out about 5-10 scrivets and remove the wheel arch plastic guard and look to the right of the wheel arch and u will see the antenna in there should be easy to work out from there
_________________ RIP SCOTT |
|||
| Top | |
|||
| Leroy |
|
||
|
being AUII is it electric?
_________________ Now driving a Hilux |
||
| Top | |
||
| Mechan1k |
|
||
|
Should be .... mine is.
bloody thing rattles in the wind when it is up too. Now that I have a Pioneer headunit it ... it stays up all of the time when the car is on too. Might take the time to look at it when i have the wheel off next and see if i can secure it a little better.
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| Disco Frank |
|
|||
|
half height switch
 put 1 in i did works wonders!
and u need to hook up the correct wire for the antenna to go down when radio is off
_________________ RIP SCOTT |
|||
| Top | |
|||
| Mechan1k |
|
||
|
Any idea where to get a half height switch from????
I hardly listen to radio anyway. I had been told with the Pioneer H/U's that the antenna stays up regardless ... I didn't think you could change it.
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| LG |
|
|||
|
{USERNAME} wrote: Any idea where to get a half height switch from????
I hardly listen to radio anyway. I had been told with the Pioneer H/U's that the antenna stays up regardless ... I didn't think you could change it. You can get the switch from Ford. It just so happens to be your lucky day though. I brought one. I was going to put it in my car. But can't be bothered. Just gonna stay with the fixed height aerial. Heres an article about it: http://www.aufalcon.com/Tech/techant.htm
_________________
|
|||
| Top | |
|||
| Mechan1k |
|
||
|
LG ... nice work there.
Looks like I got a few things to do on the ute when I am bored 
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| Disco Frank |
|
|||
|
i was lucky i had the wiring loom all in the car so i just plugged it in
_________________ RIP SCOTT |
|||
| Top | |
|||
| Mechan1k |
|
||
|
Just reading the tech doco .... would my BEM be the same ... I have the XLS ute though ... no XR ... but has all the power option ... just a lower spec cluster (hence me thinking I have a lower spec BEM as well).
Would it still work with a low-spec BEM?
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| LG |
|
|||
|
{USERNAME} wrote: Just reading the tech doco .... would my BEM be the same ... I have the XLS ute though ... no XR ... but has all the power option ... just a lower spec cluster (hence me thinking I have a lower spec BEM as well).
Would it still work with a low-spec BEM? I dont think so. You will need to wire up some sort of relay with the switch to the aerial. (Thats if you have a low-series BEM)
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 32 guests |
