|
| wadesta_1986 |
|
|||
|
Just wondering if it is possible to bolt the BA Dumpa to the EL Exhaust? Would save me a s**t load of trouble!
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
Off the XR6T? That's a single pipe into the cat and duel after. Are you planning on fitting to your factory EL exhaust sytem? Might have to make up an adapter for the different sizes and fit matching flanges or something.
|
|||
| Top | |
|||
| wadesta_1986 |
|
|||
|
Well after seeing some pics of the BA XR6T Dump pipe, its a 2 piece pipe, similar to the one on the EL. It comes off the turbo and then into a flange. I will try and find a pic of one and post it up other wise I might just have to get one and give it a shot.
|
|||
| Top | |
|||
| CHEF |
|
|||
|
You'd have to chop it up and fit new flanges ect... a dump will only cost 200 if you do some of the measuring/cutting yourself
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
wadesta_1986 wrote: Well after seeing some pics of the BA XR6T Dump pipe, its a 2 piece pipe, similar to the one on the EL. It comes off the turbo and then into a flange. I will try and find a pic of one and post it up other wise I might just have to get one and give it a shot.
But ELs don't have dump pipes from factoryu... So it must be an aftermarket one, any there could be a fair bit of difference in all the aftermarket ones avaliable, so can't really expect anyone to tell you if it's going to fit. |
|||
| Top | |
|||
| wadesta_1986 |
|
|||
|
CHEF wrote: You'd have to chop it up and fit new flanges ect... a dump will only cost 200 if you do some of the measuring/cutting yourself
Yea, it was more of a curiosity thing! I will more than likely make one up myself. Its not to hard to do and I have all of the goodies at work to do so! |
|||
| Top | |
|||
| wadesta_1986 |
|
|||
|
twr7cx wrote: wadesta_1986 wrote: Well after seeing some pics of the BA XR6T Dump pipe, its a 2 piece pipe, similar to the one on the EL. It comes off the turbo and then into a flange. I will try and find a pic of one and post it up other wise I might just have to get one and give it a shot. But ELs don't have dump pipes from factoryu... So it must be an aftermarket one, any there could be a fair bit of difference in all the aftermarket ones avaliable, so can't really expect anyone to tell you if it's going to fit. You would have to see a picture of the BA Dump pipe to see what I mean. Well, the top half of the dump pipe anyway as they are a 2 piece setup. Its just way to hard to describe. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
