|
| Saiken |
|
||
|
hey,
you guys think an exhaust shop would be able to make up a low mount exhaust manifold for an EF??? only ask cause i dont want my turbo sitting out there at the top, want to take a sleeper aproach to it all **as seen in some jzx100 chasers, skylines, supra's** cause if you follow this idea you can run a thermal blanket over it all keeping the heat in and concealing the turbo. If you dont understand what i mean, the manifold will exit the cylinders then arch up a bit then all come down and meet, for the turbo to be mounted on with the exhaust manifold adapter at the top of the turbo. thanks
_________________ Cobra Motorsports |
||
| Top | |
||
| EFFalcon |
|
|||
|
aslong as you can get everything to clear engine mount/steering components and anything else that runs down there i don't see why there would be any reason why you can't.
but have a look at some sets of extractors and you'll see how close they goto the steering shaft, i'd imagine it could cause headaches with either turbo placement or even the dump pipe.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Saiken |
|
||
|
dump pipe should be able to run pratically straight back if my rough measurements are right **straight back as in where the current exhaust is**
_________________ Cobra Motorsports |
||
| Top | |
||
| CHEF |
|
|||
|
You cant hide a turbo... your best bet is to keep the bonnet shut, quiet exhaust and dont hang a big polished intercooler out th front
|
|||
| Top | |
|||
| Saiken |
|
||
|
lol, its kind of hard to explain...... but low mount keeps the fact your running a huge turbo more discreat, and i will be running a water-air intercooler to also keep it less noticeable to the men in blue.
_________________ Cobra Motorsports |
||
| Top | |
||
| ebs_4l |
|
||
|
yea, like this..!!!
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| CHEF |
|
|||
|
Looking good ebs_4l
|
|||
| Top | |
|||
| Saiken |
|
||
|
lol, bloody nice though :O, but i like the appeal of sleepers
_________________ Cobra Motorsports |
||
| Top | |
||
| ebs_4l |
|
||
|
yea, so do i, so im getting a bumper that will completely cover the cooler, then ill paint the cooler black, then you definately wont see it
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| Saiken |
|
||
|
what inlet phlenum **cant spell** chamber have you got, and what throttle body are you using???
_________________ Cobra Motorsports |
||
| Top | |
||
| ebs_4l |
|
||
|
that is a custom made plenum by Greenslade Engineering, the throttle body is from stryder peformance in the states, it is a copy of the veilside unit...
btw, Greenslade Engineering is me and my dads business, we have made every single custom part on my car. note: that trophy was won on the weekend at our local show and shine, i won it for best 6cylinder...
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| stockstandard |
|
|||
|
IIRC Turbotrana did a low mount turbo setup with the wastegate on top
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
