|
Davehimself |
|
|||
|
Damn edited it all out.
have checked everything, it turns on in the dash but it does not engadge no matter what buttons i push. can anyone spread some light?
_________________ Last edited by Davehimself on Wed May 31, 2006 12:16 am, edited 2 times in total. |
|||
Top | |
Holbrookau |
|
|||
|
Does it engage if you press the -set button ?
Do you have a multi meter?
_________________ '94 EF GLI
|
|||
Top | |
Kit |
|
|||
|
Davehimself wrote: Damn edited it all out.
have checked everything, it turns on in the dash but it does not engadge no matter what buttons i push. can anyone spread some light? That might be the clue. Light. Any incorrectly installed tail light lamps. Are they all working ok? |
|||
Top | |
Davehimself |
|
|||
|
yup all working and all fuses still good.
_________________ |
|||
Top | |
Yagz |
|
||
|
vacuum hose has been disconnected behind the dash.
Have fun |
||
Top | |
EFFalcon |
|
|||
|
whats a vacuum line got to do with cruise control?
in EF/EL's the cruise control is completely electric, doesn't use vac at all. I'd deffinately get hold of a mulitmetre and go through the test procedure listed on the tech doc. i had to do similar with mine which ended up being brake circuit problems.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
Davehimself |
|
|||
|
yeah EF that's what i am leaning towards thinking it is but i just wanted some other ideas to try aswell while i have it all apart.
Thanks. Vaccum hose?...................lol
_________________ |
|||
Top | |
wicksy |
|
|||
|
hey my ED has a vaccuum hose for the cruise control, i didnt know until on the way home, coz we had to cut some hose we didnt know wat it was and we forgot to join in and then my cruise wouldnt work. after fixing hey presto it worked again
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
Top | |
kezz |
|
||
|
wicksy wrote: hey my ED has a vaccuum hose for the cruise control, i didnt know until on the way home, coz we had to cut some hose we didnt know wat it was and we forgot to join in and then my cruise wouldnt work. after fixing hey presto it worked again
wicksy where abouts is the vacum house? my cruise doesnt work since my conversion
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
Top | |
fordzatmyplace |
|
||
|
kezz wrote: wicksy wrote: hey my ED has a vaccuum hose for the cruise control, i didnt know until on the way home, coz we had to cut some hose we didnt know wat it was and we forgot to join in and then my cruise wouldnt work. after fixing hey presto it worked again wicksy where abouts is the vacum house? my cruise doesnt work since my conversion kezz, with EA-ED cruise control, vacum hose(s) connect all the mechanical components of the Cruise control system. So there is not just one vacume hose, there are many. I'd start by looking at the actuator and the pump for the vac leak. Also keep an ear out for a hissing under the bonnet when the engine is running. That may lead you to a hose that is dissconected.
_________________ ^^^ What He Said
|
||
Top | |
wicksy |
|
|||
|
under the steering colum towards the firewall
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
Top | |
Davehimself |
|
|||
|
well anyway back to me lol
i think i have discovered the cause, yesterday when i was doing an inspection of everything, i gave the brake sensor unit on the booster a bit of a twist and a tap and this morning it worked until i got on the brakes and then it wouldn't work again, so i'm thinkin that the sensor is just sticking inside and time for a new one. Is there any way to clean out the sensor? or recon it?
_________________ |
|||
Top | |
nicebus |
|
||
|
My XH ute has cruise control. It never would work. Light comes on dash , but set button never worked. One day I got it to the speed i wanted then pressed the minus button, then the plus button and presto it worked. I can now get it to work that way every time. Also it wont increase in 2 kay increments by tapping the plus button, but it will slow by 2 kay incruments by tapping the minus button. All other functions (resume) work fine. Also the brake light switch failed once and that stopped the cruise from working altogether until i replaced it.
F Y I |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 82 guests |