|
| dsnow_01 |
|
|||
|
{USERNAME} wrote: where do you guys run your power cables in through your fire walls on the falcons? im about to move the gas system wiring in mine so ill have to re route those *wankers put it through the clutch cable hole* i have run mine through the smaller grommet on the drivers side under the brake booster to the left.
yeah..clutch cable hole the best place for pwr cable....second best place is that main wiring harness grommet under neath the brake booster... |
|||
| Top | |
|||
| joolz |
|
|||
|
Power cable from battery, behind drivers head lamp, remove drivers side guard skin, run cable inside upper of guard, through drivers kick panel (large grommet) and finally to boot under skirt panels. No cables can be seen going past the exaust manifold into the firewall.
|
|||
| Top | |
|||
| samftr |
|
|||
|
{USERNAME} wrote: Power cable from battery, behind drivers head lamp, remove drivers side guard skin, run cable inside upper of guard, through drivers kick panel (large grommet) and finally to boot under skirt panels. No cables can be seen going past the exaust manifold into the firewall.
thats my kind of install. thanks jools, well when i do mine in the ef later in the year i will take some pics for peoples mmmkay
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| joolz |
|
|||
|
I posted pics a while ago just before the site crashed, all was lost! i think its alot better and neater way. Takes a little longer but worth it.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
