|
| effalcon6 |
|
||
|
Hi guys i need a camber/castor kit for my efi6 just wondering whats the best brand or type to get and what is the cost fitted for these.
I have used the search bar but was unable to find out how much they are. Cheers Mark. |
||
| Top | |
||
| efbignik |
|
|||
|
k mack
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| joolz |
|
|||
|
Not sure on the best but i have Noltec shim type. Heard the ratchet type can move with some gutter bumps, the same kinda problems as the X series and the cam bolts moving if not done up stinking tight.
|
|||
| Top | |
|||
| ch0c0 |
|
||
|
the K-Mac ratchet adjustable is aorund 3-350 fitted.
Shim kits are usually a little cheaper, but more work to adjust.
_________________ BOOSTED |
||
| Top | |
||
| effalcon6 |
|
||
|
joolz wrote: Not sure on the best but i have Noltec shim type. Heard the ratchet type can move with some gutter bumps, the same kinda problems as the X series and the cam bolts moving if not done up stinking tight.
Thanks for you advise cheers. |
||
| Top | |
||
| stockstandard |
|
|||
|
Think I paid about $270 for my shim c&c kit fitted.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| creeture3 |
|
||
|
paid about $200 for Noltec. So far so good.
|
||
| Top | |
||
| joolz |
|
|||
|
Oh yeah Noltec cost me $54 per side not fitted.
|
|||
| Top | |
|||
| effalcon6 |
|
||
|
stockstandard wrote: Think I paid about $270 for my shim c&c kit fitted.
Thanks dude. |
||
| Top | |
||
| effalcon6 |
|
||
|
stockstandard wrote: Think I paid about $270 for my shim c&c kit fitted.
Cheers stockstandard thanks for your advise. |
||
| Top | |
||
| XRated |
|
|||
|
I paid $88 each from Pedders, $198 for fitting, and $55 for a wheel alignment.
The fitting was a bit more than normal because I got some stuff done with my front shocks and included a full safety-check. They did a really good job and were really helpful, so I was happy to hand over my money. I don't normally fork out so much, but at the time I couldn't be bothered mucking about and just wanted everything done in one hit. This was for a shim-type. Don't get the adjustable ones. |
|||
| Top | |
|||
| efbignik |
|
|||
|
Mackay Camber/Caster Kit from Burson $143 left & right
not fitted
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 79 guests |
