|
Froudey |
|
||
|
hey hey hey any one going to give me a complete list of mpfi stuff needed for the cpi conversion so far i have written down.
MPFI ECU MPFI MANIFOLD/FUELRAIL/INJECTORS MPFI FUEL PUMP MPFI ACCLERATOR CABLE MPFI HEATER HOSE (what length etc i don't kow) i currently own a EA Falcon GL Series 2, have been told that all i need is the ecu, the complete manifold like with the loom bit fuel pump and plug it into the round plug that is already there and yeah there she goes. so does the seires 2 already have the tps plugs/sensors there? what senors do i need to change like the map sensor isc(idle speed controller) cheers
_________________ R.I.P Tobias my son. |
||
Top | |
Slabz |
|
|||
|
MPFI throttle body
and i think you need a MPFI distributor but not 100% sure on that one... also, the ISC goes on the MPFI throttle body
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
Mike_EA |
|
||
|
Just a warning if you have a 4spd its a pain in the a*** to wire up the TPS. I still havnt got mine from 3 months ago
|
||
Top | |
Southy |
|
|||
|
MPFI DIZZY
MPFI HEATER PIPE (the metal pipe that runs underneath the headers and around underneath the MPFI manifold) EEC AIR BOX SNORKLE THROTLE TO BOX PIPE |
|||
Top | |
balizticbobo |
|
|||
|
I just fitted a EB1 CPI into my MPFI EB2 and it seems to run with the CPI dissy. But dies if I disconnect the spout... Is this normal...
Things to change over... Heater pipes, drivers side that runs around the back of the motor, and the passenger side off the thermostat. Intake manifold. Intake brace. REMEMBER to use the MPFI inlet GASKET! MPFI breather hoses. MPFI engine loom. And what every one else said.
_________________ 13.28@103.73mph |
|||
Top | |
Southy |
|
|||
|
Baliz no that is not normal!
When doing the Conversion you must use a MPFI Distibuter as they differ from CPI ones |
|||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 113 guests |