|
| muscle_18 |
|
||
|
Fellas,
i need to make a new spare key for my ED Fairmont, as i only have one key and want to keep one spare. Do i just need to take it to the key cutter, and have one cut out, and i can use it straight away.....or after i get the key cut, i need to program the key somehow in the car? if so how do i programm it? Reason i ask, i dont want to end up stuffing something, cause of some security feature in the car from a faulty/bad programmed key. Thanks |
||
| Top | |
||
| alfy |
|
|||
|
i thought you had to order them from ford?
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| fordnuttz |
|
|||
|
Key Cutters should stock a range of different shaped car keys and there is a Ford copy key that they can make a spare with. They are $25 tho so a bit pricey.
|
|||
| Top | |
|||
| muscle_18 |
|
||
|
fellas,
i just looked into my log book, and it says that i must provide a key identification number. ive looked everywhere and i can not find that number. do you guys know anything about this? on ebay someone sells blank ford keys and cuts them for you also for $22,but you need to provide a key identification number so it can work in your car...this is what i cant find. thanks |
||
| Top | |
||
| MARK.TANIA |
|
||
|
just get one cut it will work you dont need to get it coded
|
||
| Top | |
||
| Froudey |
|
||
|
the key shop in dubbo quoted 16 dollar to cut the key they get them blank and cut them (somehow) but it depends if they have stock and downy newy have seen them do late model common adore key
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| justfordima |
|
|||
|
isn't the key identification number stamped on the key itself? Dunno I don't have smartlock, just thought I remembered seeing an ID number on one of my mates keys.
Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| camh1980 |
|
||
|
You need to get the code from a small dog tag on your car keys. Was issued with the keys when the car was sold. I have mine at home in a safe place, so if my keys are lost, then no one can copy them correctly.
_________________ Instant Karma is gonna get you! |
||
| Top | |
||
| djmikey |
|
||
|
Depends what model car you have. Ford can issue you your key code if you give them your vin and model number from memory. There is a key cutter in Brisbane that can do any auto key on the market, so I am sure there are others in the various states.
|
||
| Top | |
||
| Froudey |
|
||
|
the ea2 to AU2 same key has no code in the key late AU3 and BA/BF have the chip thing in the key itslef
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Shum's EL |
|
|||
|
most decent key cutters should be able to do it for ya... as said its a little pricey compared to a normal key but worth it if you've only got the one key
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
HI
go to ford at smithfield i got mine done there if you have the original locks you can give them your vin number and they can cut you one of they can just cut a copy of your one. i got mine cut there but because i have a ea with el door locks they just made a copy of my key cost me $25... hope this helps...... |
||
| Top | |
||
| Mash85 |
|
||
|
just go to a locksmith you wont need any codes. i didnt for my ef, so im guessing it would be the same for earlier e series.
when i did mine i went to a few key cutting places like mr minit, but they didnt want to know about it. they all said they couldnt cut them properly and then they get stuck in the ignition and they had been getting lots of repair bills. so id definately go to a proper locksmith
_________________
|
||
| Top | |
||
| Leroy |
|
||
|
you only need the coed if you dont have a key to copy.
as said most good locksmiths will be able to copy it easy as
_________________ Now driving a Hilux |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
