|
| veeate |
|
|||
|
need help asap..how do u get the fuel rail clips of the fuel line....are they pressed on ???????
|
|||
| Top | |
|||
| Free347 |
|
|||
|
You'll need to get a piece of cardboard or similar and wrap it around the line, then push it into the flare joint - this should 'unlock' it. You made need to push the cardboard and pull the rail at the same time to seperate... It's kinda hard to explain.
|
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
{USERNAME} wrote: You'll need to get a piece of cardboard or similar and wrap it around the line, then push it into the flare joint - this should 'unlock' it. You made need to push the cardboard and pull the rail at the same time to seperate... It's kinda hard to explain.
YEP!! I use a coke bottle cut 100mm off top of bottle and cut down one side so it fits over fuel line.. Then push bottle top into connectors and pull apart at the same time....
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| kato |
|
||
|
You can also buy a kit with various connector sizes in it, part no: FS0538
Put out by a company called Specialty.
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| veeate |
|
|||
|
Its all good..thanks guys..just disconnected the fuel rail from the manifold and swung it over the left quarter panel...
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 39 guests |
