|
| BOSXR8 |
|
|||
|
this has been not been covered in other threads although people have 'attempted' to ask. i have a 3.45 eb xr6 (series2) diff that i want to put in an ef ghia (s.s series 1) the eb diff housing is screwed up, so all i wanted to do was swap the centres using my orignial ef stub axles and housing and everything else bar the centre. is this possible? straight swap? if it is possible can someone please explain what needs to go off from the eb diff and onto the ef diff. thank you in advance guys n gals.
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| Shum's EL |
|
|||
|
i'd like to know this too... please someone help us ha ha
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
hi
i did it to my ea. but i put a ef diff in my ea ..all you have to do is remove the axles and swap the backing plates and the caliper brackets,calipers ect from your diff and put them onto the other diff and you can use the ef axles if you want.. |
||
| Top | |
||
| BOSXR8 |
|
|||
|
yeah i have put an ef diff into my eb also although i was just wondering doing the opposite with the centre only not the entire diff, tman nk when i was searching this topic i came across alot of your posts, is your tail shaft still working fine? (not hitting anything??)
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: yeah i have put an ef diff into my eb also although i was just wondering doing the opposite with the centre only not the entire diff, tman nk when i was searching this topic i came across alot of your posts, is your tail shaft still working fine? (not hitting anything??)
i changed the flange plate and used the ea flange and tailshaft and now i have no problems.. unfortunatly the ef tailshaft is just to big in diameter for the ea floor for some reason.. |
||
| Top | |
||
| BOSXR8 |
|
|||
|
can any one help me out here?
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| huggiebear |
|
|||
|
im 90% sure you remove the axels from the diff housing, take the front and rear cases off the diff and pull the insides out, do the same to the other diff and insert the LSD centre into your fiff, replace the seals with new items found on ebay and re insert your axels and im pretty sure thats all you have to do
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
