|
| 351c92EB |
|
|||||
|
i have a 1992 eb falcon that i have put a 351c with a aussie c4 auto in it
and the c4 will not go. It pumps oil but will not drive can someone help and i am after a dipstick for it as well
_________________ go hard or go home
Last edited by 351c92EB on Wed Jul 12, 2006 5:59 pm, edited 2 times in total. |
|||||
| Top | |
|||||
| Walker |
|
|||
|
An EB with a Clevo, something i wouldn't mind having a go at.
Much work in getting it in mate? Was the auto running and then just stopped, or you got it in unknown condition, fitted it and no go? |
|||
| Top | |
|||
| 351c92EB |
|
|||
|
there is alot of work to get in to fit i wont be doing it again
the C4 was going in the car it come out from XD ute V8 it got fitted 6 weeks after it come out and now will not go
_________________ go hard or go home
|
|||
| Top | |
|||
| Walker |
|
|||
|
This might sound like a stupid question, but has it got enough fluid in it?
If it was running ok before it sounds like not enough fluid, or you haven't pushed the convertor all the way home and possibly crushed the pump... but you said it's pumping. |
|||
| Top | |
|||
| Samsy |
|
|||
|
Yeah I think from memory they need around 8 to 9 litres of fluid when reinstalled. Check your levels . Always start with the easiest solution and work from there I say.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| vik351 |
|
|||
|
Make sure all vacume hoses arnt kinked or off or what ever
hooking it up to wrong port will give poxy changes vik...
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| brenx |
|
|||
|
If you seperated the box and engine while fitting them? You may have broken the front pump which is quite common.
Check the fluid level first. You check it while the car is running in gear so you'll need two people.
_________________ XB Fairmont sedan 11.07@123.02mph |
|||
| Top | |
|||
| 351c92EB |
|
|||
|
just pulled boxs out and there is no input shaft
_________________ go hard or go home
|
|||
| Top | |
|||
| brenx |
|
|||
|
lol. How'd that get left out?
_________________ XB Fairmont sedan 11.07@123.02mph |
|||
| Top | |
|||
| 351c92EB |
|
|||
|
it was not in it when i got the boxs and the torque convertor was allready in the boxs . the d**k that i got the boxs from knows s**t about boxs cos he said it was all there
_________________ go hard or go home
|
|||
| Top | |
|||
| Walker |
|
|||
|
Well looks like you found your problem lol.
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
yeh i'll second that!
is the eb gonna be efi or carby?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| 351c92EB |
|
|||
|
its going to be carbed
_________________ go hard or go home
|
|||
| Top | |
|||
| ch0c0 |
|
||
|
running straight gas im assuming ?
i doubrt it will pass emissions tests on petrol.
_________________ BOOSTED |
||
| Top | |
||
| 351c92EB |
|
|||
|
{USERNAME} wrote: running straight gas im assuming ?
i doubrt it will pass emissions tests on petrol. we dont have emissions testing over here 
_________________ go hard or go home
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 47 guests |
12.06@120MPH