|
efxr6wagon |
|
||
|
Had mild, intermittent noise for about a month. Sounded like pinging, but happened at 2000 RPM under no/low load. Tonight, started car from cool and got a quite loud chattering/chirping constant noise from 1500-2000 RPM upwards. Getting worse, now constant from 1000 RPM up, and starting to happen at idle. Sounds like coming from front passenger side of engine, just below manifold: maybe timing chain or tensioner, maybe belt tensioner, maybe air con compressor or clutch, maybe bad injector?
Anyone else encountered it? Is it likely to cause a breakdown? or just a major annoyance? Thanx all.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
Top | |
fordfreak ef |
|
|||
|
occasionally i get a lil bit of a "Chattering noise" from my 4.0 six... its the timing chain...but unless heard in person at your car its a guessing game as could be a few things as you have suggested..
|
|||
Top | |
efxr6wagon |
|
||
|
Took it to the Ford dealer. He found it in 5 seconds. The rubber in the crank pulley/damper is letting go, so the belt is rubbing against the tensioner arm (doh!). Ford wants NZ$680 for the pulley and belt. Found them at BNT for NZ$250.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 92 guests |