|
| davoeabodykit |
|
||
|
im looking for an ef xr6 manual ecu, anyone got one????
if so how much???? |
||
| Top | |
||
| Ballast |
|
|||
|
Just do the resistor mod to the auto ECU. I done that to my EF XR6 auto ECU, and it works just as well as my EF XR6 manual ECU.
Save your money, and put it to better use (more mods!). When I was looking for the Manual ECU, I was told that they are very expensive, as they are hard to get. After 3 months of looking, I found one, at $450. I wish I hadnt spent the money. Just buy an XR6 Auto ECU, and mod it... http://justfordima.koolhost.com/EFELaut ... ersion.htm hope this helps chris
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| mr_sperm1 |
|
|||
|
if it's for your EA, EF ECU won't work, unless you've got an EF motor in it
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| davoeabodykit |
|
||
|
i got a ef engine in it and ive done the resistor trick, i dont like it that much cause when ya stop at the lights it revs at 1200rpm for about 5 seconds then drops to idle speed.
id rather find a manual ecu and do it right. |
||
| Top | |
||
| Ballast |
|
|||
|
davoeabodykit wrote: i got a ef engine in it and ive done the resistor trick, i dont like it that much cause when ya stop at the lights it revs at 1200rpm for about 5 seconds then drops to idle speed.
id rather find a manual ecu and do it right. New ECU wont fix that. My car has the exact same issue, so I thought that the manual ECU would solve it. The problem is now worse. I am not sure exactly how to fix it, But it has something to do with the input that the ISC is receiving. With the auto ECU, mine would sit on 1200-1500 for a few seconds. With the manual ECU, mine revs on about 1700 RPM. As a temporary fix, I have unplugged the plug that goes to the ISC, so that the car will only hold a base idle. When I figure out a permanant Fix, I'll let you know 
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| efutura5spd |
|
|||
|
ive got 1 ake an offer!!!
either that or a standad ef manual ecu
_________________ car audio gear just ask, special prices for fm members... |
|||
| Top | |
|||
| snap0964 |
|
|||
|
chong_bonger wrote: As a temporary fix, I have unplugged the plug that goes to the ISC, so that the car will only hold a base idle. Stockstandard posted a while back to put a gasket or thin plate under the ISC with 2 3mm holes drilled in them. I haven't tried it yet, but it seems a good idea, especially as you could trial it as a gasket and vary the hole sizes to vary the airflow, and hence the amount of control the ISC has. It also has the advantage that the ISC is not unplugged, so you won't get ECU ISC error codes either.
When I figure out a permanant Fix, I'll let you know
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| davoeabodykit |
|
||
|
thanks for the info i will muck around with the isc tomorrow and see what happens.
also effutura5spd i dont know what they are worth so you just tell me how much you want for it. |
||
| Top | |
||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
i've got a EF Gli manual ecu in my EF fairmont and it also revs at about 1000rpm for about 5seconds...then drops down but i got my manual ecu with my conversion kit
_________________
|
|||
| Top | |
|||
| efutura5spd |
|
|||
|
id like at least $280 for the ecu.
_________________ car audio gear just ask, special prices for fm members... |
|||
| Top | |
|||
| davoeabodykit |
|
||
|
efutura5spd wrote: id like at least $280 for the ecu. ok, i'll think about it and let ya know
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 49 guests |
